Manual Bomann HL 1120 CB (page 27 of 46) (English, German, Dutch, French, Italian, Polish, Spanish)

651963

Zoom out

Zoom in

1/46

HL1120CB_ IM 07.04.16

Overview of the Components

1 Handle

2 Function control knob

= Off

= Fan

= 1000 Watt

= 2000 Watt

3 Function indicator lamp

4 Temperature control

5 Knurled screws

6 Stand

7 Protective grille

Notes on use

Unpacking the appliance

1. Remove the appliance from its packaging.

2. Remove all packaging material such as foils, padding,

cable holders and cardboard.

3. Fully unwind the cable.

NOTE:

There might be dust and production residue present on the

appliance. We recommend cleaning the device as described

under “Cleaning”.

Position

CAUTION:

The appliance may tip over onto its front, blocking the air

ow.

Always set the appliance onto the stand. The ideal position is a

non-slip, at surface.

Electric connection

1. Make sure the voltage of the appliance (see rating label)

matches the mains voltage to be used.

2. Set the control knob to

3. Connect the mains plug to a properly installed isolated

ground socket.

Connected load

The appliance supports a power input of 2000 W.

CAUTION: Overload:

• When using an extension cord, it must have a cable

cross-section of at least 1.5 mm².

• Do not use multi-outlet power strips, since this appliance

is too powerful.

• Do not connect any other powerful devices to the same

electric circuit.

Operation

Setting the temperature

The thermostat constantly switches the radiator on and off,

thereby keeping the temperature at the desired level. Set the

desired temperature as followed:

1. Set the temperature control to its highest setting.

2. Once the desired temperature has been reached, slowly

turn the temperature control back, until the radiator switch-

es off audibly. The indicator lamp turns off.

NOTE:

The audible position of the temperature control depends

on the ambient temperature.

3. The radiator will then keep the desired temperature level.

CAUTION:

When not using the appliance, disconnect the mains plug.

Adjusting the inclination angle

Do you want to change the inclination angle?

Proceed as follows:

1. Loosen the knurled screws slightly by turning them counter-

clockwise, so that you can move the housing.

NOTE:

Only loosen the knurled screws. Otherwise the housing

will fall off the stand.

2. Swivel the housing to the desired position.

3. Fix the housing by tightening the knurled screws again.

• The radiator should not be placed directly below a mains power

socket.

• Do not try to repair the appliance on your own. Always contact an

authorized technician. If the supply cord is damaged, it must be

replaced by the manufacturer, its service agent or similarly qualied

persons in order to avoid a hazard.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bomann HL 1120 CB in the language / languages: English, German, Dutch, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 3,41 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bomann HL 1120 CB Manual

Product: