Manual Bomann HL 1097 CB (page 28 of 54) (English, German, Dutch, French, Italian, Polish, Spanish)

651945

Zoom out

Zoom in

1/54

HL1097CB_IM_new.indd 03.06.16

Overview of the Components

1 Handle

2 Function control knob

= Fan (oscillating)

2b = 1000 Watt (oscillating)

= 1500 Watt (oscillating)

2d 0 = Off

= Fan

2f = 1000 Watt

2g = 1500 Watt

2h 0 = Off

3 Temperature control

4 Filter

5 Foot

6 Safety switch

7 Grille for heating elements

8 Indicator lamp

Instructions for use

Unpacking the appliance

1. Remove the appliance from its packaging.

2. Remove all packaging material such as foils, padding,

cable holders and cardboard.

3. Fully unwind the cable.

NOTE:

There might be dust and production residue present on the

appliance. We recommend cleaning the device as described

under “Cleaning”.

Electric connection

• Make sure the voltage of the appliance (see rating label)

matches the mains voltage to be used.

• Set the control knob to 0.

• Connect the mains plug to a properly installed isolated

ground socket.

Connected load

The appliance supports a power input of 1500 W.

CAUTION: Overload:

• When using an extension cord, it must have a cable

cross-section of at least 1.5 mm².

• Do not use multi-outlet power strips, since this appliance

is too powerful.

• Do not connect any other powerful devices to the same

electric circuit.

Safety switch

Your radiator features a safety switch that disconnects the

power supply in case the appliance falls over. The safety switch

prevents hazards caused by overheating.

WARNING:

Place the appliance on a smooth, horizontal surface. Avoid

carpets in order to prevent failure of the safety switch.

NOTE:

The appliance turns on automatically once back in an upright

position.

Filter

There is a coarse lter located on the rear side of the appliance.

This lter collects and retains dust.

Setting the temperature

The thermostat constantly switches the radiator on and off,

thereby keeping the temperature at the desired level. Set the

desired temperature as followed:

1. Set the temperature control to its highest setting.

2. Once the desired temperature has been reached,

slowly turn the temperature control back, until the radiator

switches off audibly. The indicator lamp turns off.

• The radiator should not be placed directly below a mains power

socket.

• The radiator should only be used in an upright position.

• Do not try to repair the appliance on your own. Always contact an

authorized technician. To avoid the exposure to danger, always

have a faulty cable be replaced only by the manufacturer, by our

customer service or by a qualied person and with a cable of the

same type.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bomann HL 1097 CB in the language / languages: English, German, Dutch, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 3,97 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bomann HL 1097 CB Manual

Product: