687847
6
Zoom out
Zoom in
Previous page
1/20
Next page
6
Take care of a solid and horizontal position of the
appliance. If the appliance is not horizontally lev-
eled, adjust the feet accordingly.
Power cord and water hoses may not kinked or
squashed.
Avoid the installation:
Avoid the installation:Avoid the installation:
Avoid the installation:
- near heaters, next to a stove, direct sunlight
or any other heat sources;
- at locations with high humidity (e.g. out-
doors), as metal parts would be susceptible
to corrosion under such circumstances;
- in rooms where the temperature could drop
below freezing. Do not expose the appliance
any weather.
- near volatile or flammable materials (e.g.
gas, fuel, alcohol, paint, etc.).
Installation steps
Installation stepsInstallation steps
Installation steps
Attach the
Attach the Attach the
Attach the condensation strip
condensation stripcondensation strip
condensation strip
Attach the strip under the
wooden worktop to prevent
it from damages of ascend-
ing water vapor.
First clean and dry the concerned area of the
worktop thoroughly.
Remove the protective foil from the condensation
strip and stick it flush with the worktop edge.
Cabinet opening
Cabinet openingCabinet opening
Cabinet opening
Prepare the cabinet opening
according the drawing.
Unit mm
If the appliance is installed at the corner of the cabi-
net, there must remain enough space to open the
appliance door.
1 Kitchen furniture
2 Dishwasher
3 Appliance door
Unit mm
Dimension and preparation of the decoration panel
Dimension and preparation of the decoration panelDimension and preparation of the decoration panel
Dimension and preparation of the decoration panel
Prepare the wooden
decorative panel ac-
cording to the dimen-
sional drawing.
Unit mm
Align the drilling template and mark the necessary
holes. Check this with a spirit level.
Drill holes of Ø 2 mm and 8 mm depth at the pre-
marked positions in the panel.
Fixing the decoration panel
Fixing the decoration panelFixing the decoration panel
Fixing the decoration panel
Insert the brackets into the holes of the decorative
panel and turn the screws in.
Hook the decorative panel with the brackets into
the provided slots on the appliance front.
Align the panel and the appliance front against
each other and fix the panel on the unit door.
First remove the factory-mounted short screws
(4xS1) from the door inside.
Screw the supplied long screws (4xS2).
Adjusting of the door spring tension
Adjusting of the door spring tensionAdjusting of the door spring tension
Adjusting of the door spring tension
After fixing the decoration
panel, the door spring
tension must be adjusted
accordingly.
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bomann GSPE 892 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bomann GSPE 892 in the language / languages: English as an attachment in your email.

The manual is 0,95 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bomann GSPE 892

Bomann GSPE 892 User Manual - German - 24 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info