552129
6
Zoom out
Zoom in
Previous page
1/33
Next page
Witheachwashcycle.
Compartment
For programm es with pre-wash only.
(Follow the user instructions!)
Electric indicator on control panel (if provided).
Check t he rinse aid level
(On mo dels with water softener system only.)
Electric indicator on control panel (if provided).
If ther e is no salt warning light in the control panel
(for some models), you can estimate when to fill the salt into
the softener by the number of cycles the dishwasher has run.
Check th e regeneration
salt level
Load t he baskets
Select a programme
Turn on the water tap and press the Start/reset button. The machine will start working
after about 10 seconds.
Running the dishw asher
Switch off the appliance
Turn off the water tap,
unload the baskets
Fill the detergent dispenser
Warning: wait a few minutes (about 15 minutes) before unloading the dishwasher to avoid handling
the dishes an d utensils while they are still hot and more susce ptible to break.
They will a lso dry better.Unload the appliance, starting from the lower basket.
Changing t he programme
Add forgotten dishes in the
dishwasher.
Scrape off any large amount of leftover food. S often remnants of burnt food in pans,
then load the baskets. Refer to the dishwasher loading instructions.
Close the door, press the Programme button until the selected programme lights up.
( See the section entitled Operationg instruction )“”
When the working cy cle ha s finished, the buzzer of the
dishwasher wi ll sound 8 times, then stop.
Turn off the appliance using the ON/OFF button.
If the appliance is switched
off during a wash cycle.
Op en t he do or car efull y.
Hot st eam m ay escape
when thedoor isopened!
If the a p pliance is switched off during a wash cycle, when switched
on again, please re-select the wash ing cycle and operate th e dishwasher
according to the original Power-on state ).
Switch on the appliance Pres s the On/Off button t o switch on the applianc e, Open the door.
1.Open the door a little to s top the dishwasher .
2.After the spray arms stop working, you ca n open the door completely.
3.Add the forgotten dishes.
4.Close the door, the dishw asher will start running again after 10 seconds.
For detailed operating method read the corresponding content on the instruction manual.
1. A running cycle can only be modified if it has been running for a short time. Otherwise the detergent
m ay h ave already been released and the water already drained. If this is t h e case, the de tergent
dispenser must be refilled.
2. Press the S tart/Reset button for more than 3 seconds to cancel the running programme.
3. Select a new programme.
4. Restart the dishwasher.
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bomann GSPE 874 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bomann GSPE 874 in the language / languages: English as an attachment in your email.

The manual is 4,37 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bomann GSPE 874

Bomann GSPE 874 User Manual - German - 27 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info