552125
14
Zoom out
Zoom in
Previous page
1/27
Next page
14
12/2012
6.
S
TARTEN EINES
S
PÜLPROGRAMMS
Spülprogramm-Tabelle
ANMERKUNG: bedeutet: In den Klarspüler-Behälter ist Klarspüler einzufüllen.
Pro-
gramm
Programmauswahl-
Information
Programmbeschrei-
bung
Rein
i-
gungs-
mittel
Vor/Haupt
Lauf-
zeit
(Min.)
Ener-
gie
(kWh)
Was-
ser
(L)
Klar-
spü-
ler
Intensiv
Für stark verschmutz-
tes Geschirr und
eingetrockneten
Speiseresten
Vorspülen (50°C)
Hauptspülen (65°C)
Spülen (55°C)
Trocknen
4/23 g
(oder Tab o.
Zugabe von
Klarspüler)
120 1.13 16.0
Normal
Für normal ver-
schmutztes Geschirr.
Vorspülen (50°C)
Hauptspülen (55°C)
Spülen (65°C)
Trocknen
4/23 g
(oder Tab o.
Zugabe von
Klarspüler)
155 1.09 13.0
ECO
*EN 50242)
Für leicht ver-
schmutztes Geschirr,
tägliche Anwendung
Vorspülen
Hauptspülen (50°C)
Spülen (65°C)
Trocknen
4/23 g
(oder Tab o.
Zugabe von
Klarspüler)
160 0.77 10.5
Express
Für leicht ver-
schmutztes Geschirr
Hauptspülen (40°C)
Spülen (50°C)
Trocknen
27 g 60 0.77 10.0
Glas
Für leicht ver-
schmutztes Geschirr
und Glas
Vorspülen
Hauptspülen (40°C)
Spülen (60°C)
Trocknen
15 g 95 0.71 13.0
Schnell
Schneller Spülgang
für leicht verschmutz-
tes Geschirr
Hauptspülen (40°C)
Spülen (40°C)
15 g 30 0.50 9.0
ANMERKUNG: *EN 50242: dieses Programm ist das Testprogramm.
Information für den Vergleichbarkeitstest nach EN 50242 wie folgt:
- Kapazität: 9 Gedecke
- Position des oberen Korbes: obere Räder auf Schienen
- Klarspüler-Einstellung: 6
- Leistungsaufnahme im Aus-Zustand: 0.0 W
unausgeschalteten Zustand:: 0.4 W
Einschalten des Gerätes
Starten eines Spülprogramms
- Ziehen Sie den oberen und den unteren Korb heraus, stellen Sie das Geschirr ein und schieben Sie
die Körbe zurück. Es wird empfohlen, zuerst den unteren Korb und dann den oberen Korb zu bela-
den (siehe Abschnitt “Beladen der Geschirrspülmaschinenkörbe”).
- Füllen Sie Reinigungsmittel ein (siehe Abschnitt “vor der Erstinbetriebnahme”).
- Stecken Sie den Netzstecker in die Netzsteckdose. Stromversorgung: 220-240 VAC/50 Hz, Steck-
dose: 10 A, 250 VAC. Die Wasserversorgung muss bis zum Höchstdruck geöffnet sein.
- Drücken Sie die EIN/AUS-Taste, die Netzkontrolllampe leuchtet auf.
- Drücken Sie die Programmtaste und wählen das gewünschte Spülprogramm. Durch nochmaliges
betätigen der Programmtaste ändern Sie die Programmwahl.
- Schließen Sie die Tür. Wenden sie dafür etwas Kraft auf, damit die Tür richtig geschlossen ist.
Wenn Sie beim Schließen der Tür ein Klicken hören, ist der Geschirrspüler richtig geschlossen.
Nach ca. 10 Sekunden wird der Betrieb gestartet.
Programmänderung
Voraussetzung:
- Ein laufender Spülzyklus kann nur geändert werden, wenn er erst kurze Zeit gelaufen ist. Anderen-
falls wurde möglicherweise schon Reinigungsmittel freigesetzt und das Gerät hat möglicherweise be-
reits Spülwasser abgelassen. Wenn dies der Fall ist, muss der Reinigungsmittel-Behälter neu befüllt
werden (siehe Abschnitt „Reinigungsmittel einfüllen“).
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bomann GSPE 787 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bomann GSPE 787 in the language / languages: German as an attachment in your email.

The manual is 2,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bomann GSPE 787

Bomann GSPE 787 User Manual - English - 31 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info