814373
30
Zoom out
Zoom in
Previous page
1/44
Next page
30
Dimension and preparation of the decoration panel
Prepare the wooden decorative panel according to
the dimensional drawing below.
CAUTION:
Before drilling, check the furniture front for sufficient
thickness.
Unit mm
Align the enclosed drilling template and mark the
necessary drill holes. Check them with a spirit
level.
Drill holes of Ø 2 mm and approx. 8 mm depth at
the pre-marked positions in the panel.
Fixing the decoration panel
Countersink the holders into the holes in the dec-
oration panel and screw in the screws.
Hook the decoration panel with the holders into
the recesses provided on the front of the appli-
ance.
Align the panel and the appliance front with each
other and fix the panel to the appliance door.
To do this, first remove the short screws (4xS1)
mounted at the factory from the inside of the door.
Screw in the supplied long screws (4xS2).
Adjusting of the door spring tension
After fixing the decoration panel, the door spring
tension must be adjusted accordingly.
Turn the set screws clockwise or counterclock-
wise as required. The steel cable tightens or loos-
ens.
Check the door spring tension. If the appliance
door remains horizontal when fully open, but close
easily, the tension is set correctly. Otherwise,
make the adjustment again.
Connection to the water supply
Connect the water inlet hose and the water drain
hose properly. Follow the instructions given under
"Water connection"
.
Installation to the power supply
Follow the instructions given under
"Electrical con-
nection"
.
Adjusting the feet
Place the appliance in its proper position and make
sure that it is firm and level. Check this with a spirit
level.
The maximum adjust-
ment height of the feet
is 50 mm.
The rear stand can be adjusted with an Allen key
via a set screw (a) in the center of the appliance
base front.
30


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bomann GSPE 7416 VI at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bomann GSPE 7416 VI in the language / languages: English, German as an attachment in your email.

The manual is 1.97 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info