Manual Bomann GSPE 7415 VI (page 32 of 44) (English, German)

814372

Zoom out

Zoom in

1/44

• Connect the drain hose to a drainpipe (B) with a

minimum diameter of 40 mm; alternatively, the

hose can be attached to a sink or directly to the

drain (A).

• In any case, make sure that the drain hose is not

bent or squeezed.

• The drain hose may be installed up to a maximum

height of 1000 mm above the rinsing floor.

• Fasten the hose securely to prevent it from

changing its position and thus leaking water.

Electrical connection

WARNING:

• The installation to the mains supply must conform

to the local standards and regulations.

• Improper connection may cause to an electric

shock!

• Do not use multiple sockets or extension cords.

• It is not allowed to modify the plug provided with

the appliance! If the plug does not fit properly to

the outlet, let install a proper outlet by an author-

ized specialist.

• The accessibility of the power plug must always

be ensured to disconnect the appliance from the

power supply in case of an emergency.

• Make sure that the voltage supply matches the

specifications on the rating label (door frame) be-

fore connecting.

• Connect the mains cable to a properly installed

and earthed wall outlet.

• If the plug after installation is not accessible, a

corresponding disconnect device must be availa-

ble to meet the relevant safety regulations.

Prior using for the first time

Before using your dishwasher for the first time:

A. Filling salt into the salt container (water softener)

B. Filling the rinse aid dispenser

C. Filling detergent

CAUTION:

• Use only salt, rinse aid and detergent for dish-

washers. Other products may damage the appli-

ance.

• Always consider the dosage and storage recom-

mendations on the sales packaging.

WARNING:

Keep salt, rinse aid and detergent out of reach of

children.

A. Filling salt into the salt container (water softener)

Water softener

Water hardness varies regionally. If hard water is

used in the dishwasher, deposits form on the dishes

and kitchen utensils. The appliance is equipped with

a water softener, that removes lime and minerals

from the water by using water softening in the salt

container. Your local water authority can advise you

on the hardness of the water in your area.

Adjusting the salt consumption

The salt consumption can be adjusted according to

your water hardness and thus be regulated optimally.

• Switch on the appliance.

• Press the program selection button for more than

5 seconds, the setting mode is now activated for

approx. 60 seconds.

• By repeatedly pressing the program selection

button the water hardness can be selected:

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bomann GSPE 7415 VI in the language / languages: English, German as an attachment in your email.

The manual is 1.95 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bomann GSPE 7415 VI Manual

Product: