688021
8
Zoom out
Zoom in
Previous page
1/20
Next page
8
The setting is automatically saved after a few
seconds; alternatively end the setup with the
Power button.
Water hardness
Water hardnessWater hardness
Water hardness
Setting / Di
Setting / DiSetting / Di
Setting / Dis-
s-s-
s-
play indicator
play indicatorplay indicator
play indicator
Salt cons.
Salt cons.Salt cons.
Salt cons.
/
/ /
/
cycle
cyclecycle
cycle
°dH
°dH°dH
°dH
Mmol/l
Mmol/lMmol/l
Mmol/l
0-5 0-0.94 H1 0 g
6-11 1.0-2.0 H2 9 g
12-17 2.1-3.0 H3 12 g
18-22 3.1-4.0 H4 20 g
23-34 4.1-6.0 H5 30 g
35-55 6.1-9.8 H6 60 g
NOTE
NOTENOTE
NOTE:
::
:
°dH: German degree of hardness
Factory setting: H3
Fill in the salt
Fill in the saltFill in the salt
Fill in the salt
CAUTION:
CAUTION:CAUTION:
CAUTION:
Only refill the salt container when the salt warning
lamp is lighting.
During filling the salt container, salt and water can
escape. Start a program immediately after you
have filled the container to prevent corrosion.
Remove the lower basket and unscrew the lid of
the salt container.
Add about 1.5 kg of salt by using the supplied
funnel tube.
Full fill the salt container with water (just before
the first use).
Screw the lid firmly on again after filling the con-
tainer.
Depending on salt resolution, the warning lamp
usually disappears immediately after filling.
B
BB
B.
. .
.
Fill the rinse aid dispenser
Fill the rinse aid dispenserFill the rinse aid dispenser
Fill the rinse aid dispenser
Function of rinse aid
Function of rinse aidFunction of rinse aid
Function of rinse aid
The rinse aid is automatically added during the final
rinse, ensuring thorough rinsing and a spot and
streak free drying.
When to refill the rinse aid dispenser
When to refill the rinse aid dispenserWhen to refill the rinse aid dispenser
When to refill the rinse aid dispenser
As long as the corresponding
message does not light up in the
display, you can estimate the
amount of remaining rinse aid to the optical level
indicator (D
DD
D) next to the dispenser.
When the rinse aid dispenser is full, the indicator is
completely dark. If the rinse aid diminishes, the size
of the black dot changes as shown below. In order to
avoid spotting, the rinse aid level must not drop be-
low ¼.
full ¾ full
½ full
¼ full empty
Fill in the rinse aid
Fill in the rinse aidFill in the rinse aid
Fill in the rinse aid
To open the dispenser screw the lid counter-
clockwise to the open position and remove the lid.
Add the rinse aid into the dispenser, being careful
not to overfill. The dispenser contains approx.
110 ml.
Before closing the appliance door, put on the lid in
the open position back and turn it clockwise to the
closed position.
NOTE
NOTENOTE
NOTE:
::
:
Remove spilled rinse aid with an absorbent cloth to
avoid excessive foaming during the next rinse.
Adjusting the rinse aid dosage
Adjusting the rinse aid dosageAdjusting the rinse aid dosage
Adjusting the rinse aid dosage
When forming spots and the dishes dries poorly,
increase the added amount of rinse aid. You can set
the amount of addition between level 1 (min.) and
level 6 (max.).
Take off the lid of the rinse aid dispenser
and adjust the dial to the desired level.
The factory setting is “4”.
NOTE
NOTENOTE
NOTE:
::
:
Increase the dosage if there are drops of water or
lime spots on the dishes after rinsing. Reduce the
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bomann GSP 864 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bomann GSP 864 in the language / languages: English as an attachment in your email.

The manual is 0,94 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bomann GSP 864

Bomann GSP 864 User Manual - German - 24 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info