814367
39
Zoom out
Zoom in
Previous page
1/44
Next page
39
Malfunction / cause / action
Noises
- Make sure all dishes are secured in the dish-
washer.
- Place items so that the spray arms can rotate
freely.
Foaming
Use only special dishwasher detergent to prevent
foaming. Should this occur, open the dishwasher
door and allow the foam to escape. If necessary,
add some cold water to the tub. Start a rinse cycle
to drain the water.
Plates, other flatware is not clean
- Select a stronger program.
- Make sure that the function of the spray arms is
not blocked by large dishes.
Stains and film formation
- Extremely hard water.
- Low inlet temperature.
- Overloading, incorrect loading.
- Old or damp detergent.
- Incorrect detergent dosage.
Staining of glassware
Use less detergent with soft water and select the
shortest rinse cycle to clean and rinse glassware.
Black, gray stains
Dishes were in contact with aluminum parts. Use a
mild scouring agent to remove these stains.
Stains on inner pan
Only use cleaning agents without dyes.
White film inside the appliance
Minerals in hard water: Use a damp sponge with
dishwasher detergent. Wear rubber gloves when
doing so.
Unsatisfactory drying result
- Incorrect loading.
- Dishes are removed too early.
- Incorrect program selection.
- Use of cutlery with poor coating.
Error codes
In case of some malfunctions, the appliance displays
the following error codes to warn you:
Code
Meaning / possible cause
E1
Water inlet fault! Faucet not open, inlet
blocked or water pressure too low.
E3
Malfunction of the heating element!
Rinsing temperature is not reached.
E4
Overflow / water leakage!
Ed
Communication error between main and
display board.
CAUTION:
In case of water leakage, close the main valve
before contacting an authorized technician.
If there is water in the lower part of the housing
due to overfilling or a small leak, remove this wa-
ter before restarting the appliance.
NOTE:
If a problem persists after following the steps above,
contact your distributor or an authorized technician.
Technical data
Electrical connection / water supply………....………..
Connection voltage: ....……..220-240 V~ / 50 Hz
Rated power: …………..……….…..….1760 2100 W
Rated current: ………………………..…………….10 A
Water pressure: ………………….....……0.04 1 Mpa
Dimension H x W x D / weight..……....………………..
Unit size: ………………......…84.5 x 44.8 x 61.0 cm
Net weight: ……...……...…..………....ca. 35.0 kg
Available accessory……………………………………..
Inlet hose safety system: ………….Art.-No. 8900 410
For more information about the product, scan the QR
code on the supplied energy label and/or visit the
official website of the product data bank:
https://eprel.ec.europa.eu
39


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bomann GSP 7411 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bomann GSP 7411 in the language / languages: English, German as an attachment in your email.

The manual is 1.7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info