552047
7
Zoom out
Zoom in
Previous page
1/20
Next page
7
12/2011
- Only fill with salt just before starting one of the complete washing programs. This will prevent any
grains of salt or salty water, which may have been split, remaining on the bottom of the machine for
any period of time, which may cause corrosion.
A. Remove the lower basket and then unscrew and remove the cap from the salt container
(pic. 1)
.
B. If you are filling the container for the first time, fill 800 ml of its volume with water.
C. Place the end of the funnel (supplied) into the hole and introduce about 1.5 kg of salt. It is normal
for a small amount of water to come out of the salt container
(pic. 2)
.
D. Carefully screw the cap back on.
E. Usually, the salt warning light will be off in 2-6 days after the salt container is filled with salt.
F. Immediately after filling the salt into the salt container, a washing program should be started (we
suggest to use the rapid program). Otherwise the filter system, pump or other important parts of the
machine may be damaged by salty water. This is out of warranty.
NOTE:
- The salt container must be refilled when the salt warning light in the control panel lights up. Though
the salt container is filled enough, the indicator light may not black out before the salt fully dissolve.
If there is no salt warning light in the control panel (for some models), you can judge when to load
the salt into the softener by the cycles that the dishwasher had run (see the following schema).
- If there are spills of the salt, a program (rapid) could be run to wipe them out.
C. Fill the Rinse Aid Dispenser
Function of Rinse Aid
Rinse aid is automatically added during the last rinse, ensuring thorough rinsing, spot and streak free
drying.
ATTENTION: Only use branded rinse aid for dishwasher. Never fill the rinse aid dispenser with
any other substances (e.g. dishwasher cleaning agent, liquid detergent). This would damage the ap-
pliance.
When to Refill the Rinse Aid Dispenser
If there is no rinse-aid warning light on the control panel, you can judge the amount of rinse-aid by the
color of the optical level indicator "D" located next to the cap. When the rinse-aid container is full the
whole indicator will be dark. As the rinse aid diminishes, the size of the dark dot decreases.
You should never let the rinse aid get below 1/4 full.
As the rinse aid diminishes, the size of the black dot on the rinse aid level indicator changes, as illus-
trated below.
full
¾ full
½ full
¼ full – refill to eliminate spotting
empty
D
(
Rinse aid indicator
)
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bomann GSP 5703 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bomann GSP 5703 in the language / languages: English as an attachment in your email.

The manual is 1,26 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bomann GSP 5703

Bomann GSP 5703 User Manual - German - 22 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info