688045
23
Zoom out
Zoom in
Previous page
1/32
Next page
23
Transfer the upper door hinge at the opposite appliance
side, after you have unscrewed the hinge pin and used
by the other hinge side. Put the hinge pin in the hole of
the appliance door
and tight the screws of the hinge.
Replace the appliance cover, which you have removed
at the beginning. Tight the screws and clip the screw
covers on.
Check if the door is arranged vertical as well as horizontal, so that a smooth opening and closing of the
door is ensured.
Dismount the door handle and attach it to the corresponding other door outer side. Refer to the instructions
in "Assembling the door handle". Transfer the cover caps on the exposed holes to the respective other
door outer side.
Startup / Operation
Startup / OperationStartup / Operation
Startup / Operation
Prior to first use
Prior to first usePrior to first use
Prior to first use
CAUTION
CAUTIONCAUTION
CAUTION:
::
:
After transport, the appliance should be left standing upright for about 4 hours before connecting to the power
supply. Nonobservance could lead to malfunction of the cooling system and causes a breakdown of the appli-
ance.
Clean the interior of the appliance including all accessory parts located inside. Consider the instructions which
we provide in the chapter “Cleaning”.
Starting the appliance
Starting the applianceStarting the appliance
Starting the appliance
Connect the appliance to the power supply; the control lamp POWER lights.
Operate the temperature control, which is located at the appliance front. See also the following section
"Control panel / Settings".
Control panel
Control panelControl panel
Control panel
/ Settings
/ Settings/ Settings
/ Settings
Temperature control
Temperature controlTemperature control
Temperature control
Setting COLD lowest setting (warmest inside temperature)
Setting MID medium setting (optimal operating temperature)
Setting COLDER highest setting (coldest inside temperature)
The power levels COLD – COLDER regulates the different values of the internal temperature.
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bomann GS 3183 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bomann GS 3183 in the language / languages: English as an attachment in your email.

The manual is 0,53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info