688044
16
Zoom out
Zoom in
Previous page
1/24
Next page
16
Transport
Transport Transport
Transport and Packaging
and Packagingand Packaging
and Packaging
Transport the appliance
Transport the applianceTransport the appliance
Transport the appliance
Transport the appliance, if possible, only in vertical
position. Otherwise, it is absolutely necessary to
allow the appliance standing upright for a few hours
before installation ”Prior to first use”. Protect the ap-
pliance during transport against weather influences.
NOTE
NOTENOTE
NOTE:
::
:
The appliance has castors which facilitate the
transport and installation of the appliance. Tilt the
appliance back slightly and move it gently.
Unpack the appliance
Unpack the appliance Unpack the appliance
Unpack the appliance
Remove the appliance from its packaging.
Remove all packaging material, such as foils, filler
and cardboard packaging.
To prevent hazards, check the appliance for any
transport damage.
In case of damage, do not put the appliance into
operation. Contact your distributor.
CAUTION: Transport protection!
CAUTION: Transport protection!CAUTION: Transport protection!
CAUTION: Transport protection!
Pull off the foil from the appliance sides.
NOTE
NOTENOTE
NOTE:
::
:
Production residue or dust may have collected on the
appliance. We recommend cleaning the appliance
according to chapter “Cleaning”.
Appliance
Appliance Appliance
Appliance Equipment
EquipmentEquipment
Equipment
Appliance overvi
Appliance overviAppliance overvi
Appliance overview
ewew
ew
1
11
1 Temperature control
2
22
2 Compartment with
freezing flap
3
33
3 Freezing drawers
4
44
4 Adjustable feet at the
front / castors at the
rear
Delivery sc ope
Delivery sc opeDelivery sc ope
Delivery sc ope
1 x freezing flap, 4 x freezing drawer, 1 x ice-cube
tray, for assembling the door handle: door handle
incl. fixing screws with covers, for reversing the door
opening: dummy cap (A)
Installation
InstallationInstallation
Installation
Condition
ConditionCondition
Conditions for the installation location
s for the installation locations for the installation location
s for the installation location
Good ventilation is required around the appliance,
in order to dissipate the heat properly and to
guarantee efficient cooling operation at low power
consumption. Sufficient clearance is necessary.
- Gap to the back and to the side walls each
approx. 5 cm;
- Place the appliance so that the appliance door
can open without being impeded.
Only install at a location with an ambient tempera-
ture suitable for the climate class of the appliance.
For information on the climate class, please refer
to chapter “Technical Data” or to the rating label
located in the interior or on the rear side of the
appliance.
Place the appliance on a steady and safe surface.
If the appliance is not horizontally leveled, adjust
the feet accordingly.
Avoid the installation:
Avoid the installation:Avoid the installation:
Avoid the installation:
- near heaters, next to a stove, direct sunlight or
any other heat sources;
- at locations with high humidity (e.g. outdoors,
bathroom), as metal parts would be suscepti-
ble to corrosion under such circumstances;
- near volatile or flammable materials (e.g. gas,
fuel, alcohol, paint, etc.), in rooms which may
have poor air circulation (e.g. garages).
- Do not expose the appliance any weather.
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bomann GS 3181 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bomann GS 3181 in the language / languages: German as an attachment in your email.

The manual is 0,47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info