552107
7
Zoom out
Zoom in
Previous page
1/11
Next page
7
04/2013
6. Attach the upper door hinge by using the screws at the opposite side, after you unscrewed the
hinge pin and screwed it on at the other side of the door hinge again.
Put the in point 1 removed device cover on again, tight the screws and clip the cover caps on.
7. Affix the door handle at the opposite side by loosening the screws of the handle, take the cover
caps from the door and screw on the handle at the below holes. Put the cover caps on the exposed
holes at the other side.
Check if the door is arranged vertical as well as horizontal, so that a smooth opening and closing of
the door is ensured.
STARTUP / OPERATION
Prior to first use
ATTENTION
After transport, the device should be left standing for 4 hours in order for the oil to be collected in the
compressor.
Nonobservance could cause damage to the compressor and hence result in failure of the
device. This would void your warranty claim.
Clean the interior of the device including all accessory parts located inside.
Connect the device to the mains supply
IMPORTANT
The device must be earthed properly. For this purpose the plug of the mains cable has been fitted
with the intended lead.
Contact an electrician if the plug does not fit in the wall socket.
In case you disconnect the device or in case of power failure: Wait for 5 minutes before restarting
the device.
Turning on
Turn on the device by connecting the plug to a wall socket. At the temperature control, located on the
control panel at the device front, you can adjust the desired temperature. Please also refer to the
chapter “Control panel settings“.
Control panel & settings
The control panel that controls the temperature inside the freezer compartment is located inside:
Adjustable thermostat
Setting Cold (min): lowest setting (warmest inside temperature)
Setting Colder (max): highest setting (coldest inside temperature)
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bomann GS 184 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bomann GS 184 in the language / languages: English as an attachment in your email.

The manual is 0,55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bomann GS 184

Bomann GS 184 User Manual - German - 13 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info