552185
7
Zoom out
Zoom in
Previous page
1/14
Next page
7
1. Use a flat thin-blade screwdriver to remove the blind plug (1) and the hinge cover (2).
2. Tilt the device slightly backwards and block it in this position.
3. Dismount the upper door hinge (4) by unscrewing the screws (3).
4. Open the door a little and take it carefully from the lower door hinge (5). Shift the blind plug (9) at
the other device side. Place the door on a padded surface to prevent it from scratches.
5. Dismount the lower door hinge (5) incl. foot (7) by unscrewing the screws (6).
6. Screw the separate foot (8) off.
7. Transfer the lower hinge (5) incl. foot (7) at the opposite device side and fix it with the screws (6).
8. Screw the separate foot (8) at the corresponding opposite side in again.
9. Replace the device in the upright position again. Insert the device door on the hinge pin of the low-
er door hinge (5) and fix the door at the allocated position.
10. Attach the upper door hinge (4) by using the screws (3) at the corresponding opposite device side.
11. Put the blind cap (1), which has been removed at the beginning, to the uncovered hole at the op-
posite side. Clip the hinge cover (2) on again.
12. Check if the door is arranged vertical as well as horizontal, so that a smooth opening and closing of
the door is ensured.
Startup / Operation
Startup / OperationStartup / Operation
Startup / Operation
Prior to first use
Prior to first usePrior to first use
Prior to first use
CAUTION:
CAUTION:CAUTION:
CAUTION:
After transport, the device should be left standing for 4 hours in order for the oil to be collected in the
compressor.
Nonobservance could cause damage to the compressor and hence result in failure of the
device. This would void your warranty claim.
Clean the interior of the device including all accessory parts located inside. Please consider the
instructions that we have included for you in the chapter on “Cleaning”.
1 Blind plug
2 Hinge cover
3 Screws
4 Upper door hinge
5 Lower door hinge
6 Screws
7 Foot
8 Separate foot
9 Blind plug
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bomann GB 288 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bomann GB 288 in the language / languages: English as an attachment in your email.

The manual is 0,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bomann GB 288

Bomann GB 288 User Manual - German - 16 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info