651964

Bomann FR 2253 CB Manual

37
Zoom out
Zoom in
Previous page
1/62
Next page
37
FR2253CB_IM 10.05.16
CAUTION: Overload!
• If you use extension cords, they should have a conduc-
tor cross-section of at least 1.5 mm
2
.
• Do not use any multiple sockets, as this appliance is too
powerful.
Power On / Off
With the temperature control (8) in the position “•”, the appli-
ance is switched off.
Set the desired temperature with the temperature control (8).
Use
1. Make sure that the appliance is disconnected from the
mains and is switched off (the pilot lamps (10) / (11) are off).
2. Press the button (7) to open the lid of the appliance.
3. To remove the frying basket (12), reach into the depression
and pull the frying basket handle (13) up, until it latches.
4. Fill the deep-drying fat container with oil or fat (4) (max.
2.5 liters). The lling level must be between the min. and
max. marks.
5. Connect the plug to a properly installed safety plug
socket.
6. Set the desired temperature with the temperature control
(8). Both pilot lamps (10) / (11) light up.
7. Close the lid (3) during the heating phase. The heating
pilot lamp goes out when the set temperature has been
reached.
8. Fill the deep-frying basket (12). Open the lid (3) and hang
the basket (12) with the deep-fried products in the recess.
9. Close the lid (3). Loosen the handle (13) by sliding the
button (14) on the handle. The deep-frying basket (12) is
now in the hot fat.
NOTE:
The heating pilot lamp (10) is switched on and off several
times during the deep-frying. This is normal and indicates
that the temperature is being thermostatically controlled
and maintained.
10. After the deep-frying time has passed, open the lid (3)
carefully.
WARNING:
Hot steam may escape.
11. Now remove the deep-frying basket (12).
12. You can let the oil drip off the deep-fried products for
some time. For this, hang the deep-frying basket (12)
with the holder (15) on the edge of the deep-frying fat
container (4).
Ending Operation
1. Turn the temperature control (8) counterclockwise to the
“•” position.
2. Disconnect the mains plug from the socket.
3. Let the frying cool down for a considerable time. Check
that the temperature is safe before handling the lled
deep-frying fat container (4) any further.
Cleaning
WARNING:
• Always pull out the plug from the mains socket before cleaning and
wait until the appliance has cooled down.
• Never immerse the housing in water. Doing so may result in an
electric shock or re.
CAUTION:
• Do not use a wire brush or abrasives for cleaning.
• Do not use abrasive or aggressive cleaners.
Deep-frying fat container and housing
• Pull off the lid (3) in upward direction.
• To change the oil, pour out the oil to the side.
• After use, clean the deep-frying fat container (4), the
deep-frying basket (12), the housing (5) and the lid (3)
with a moist cloth. Possibly, you should use household
detergent.
Odor and fat vapor lter
• Wipe the lter in the lid with a moistened cloth and a little
household detergent.
Storage
• Clean the appliance as described above and let it dry
completely before using it again.
• During longer periods of non-use we recommend storing
the appliance in its original packaging.
• Always keep the appliance at a well-ventilated and dry
location, out of the reach of children.
… 37 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bomann FR 2253 CB at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bomann FR 2253 CB in the language / languages: English, German, Dutch, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 3,94 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info