814731
12
Zoom out
Zoom in
Previous page
1/58
Next page
EWB6068CB_IM 06.07.23
12
Ice Cube Container
Remove the ice cube container. Clean it in warm rinse water
with a little hand dishwashing liquid. Rinse with clean water.
Filter Sieve
Clean the lter sieve at regular intervals to remove limes-
cale deposits.
1. Pull the lter sieve off the bottom of the water tank.
2. Rinse the lter sieve under running water. You can use a
nylon brush to help.
3. Put the lter sieve back on the pins at the bottom of the
water tank.
CAUTION:
Never use the appliance without the lter sieve!
Housing and Interior
Clean the housing and the inside of the appliance with a
damp cloth. Make sure that no moisture gets into the air
inlet or air outlet openings.
Use a diluted solution of vinegar and water.
Wipe the inside of the appliance dry.
Storage
Allow the interior of the appliance to dry completely
before closing the lid and storing the appliance.
We recommend storing the appliance in its original
packaging if you do not intend to use it for a long period
of time.
Always store the appliance out of the reach of children in
a well-ventilated and dry place.
Troubleshooting
Problem Possible Cause Remedy
The appliance has no
function.
The appliance has no power supply. Check the power socket with another appliance.
Insert the mains plug correctly.
Check the house fuse.
The appliance is defective. Contact our service or a specialist.
The compressor makes
abnormal noises.
The mains voltage is too low. Switch off the appliance and check the mains
voltage.
The ADD WATER control
lamp lights up.
Water shortage. Rell with water as described in the chapter
“Operation” “Making ice cubes”.
The ICE FULL control lamp
lights up.
The ice cube container is full. Empty the ice cube container.
The ice cubes are too small. The ambient temperature is too high. Move the appliance to a cooler place. Ensure
sufcient air circulation around the appliance.
The water temperature is too high. Stop the ice cube production. Drain some water
and rell with cold water (max. 20 °C).
Ice cube size incorrectly selected. Select the LARGE size with the button while
the appliance is in ice cube size selection mode.
Smaller ice cubes are normal for the
rst few cycles.
The ice cubes are too big and
stick together.
The water temperature or the ambient
temperature is too low.
Stop the ice cube production. Drain some water
and rell with lukewarm water (max. 35 °C).
The ice cube container is full,
but the ICE FULL control lamp
does not light up.
The sensor for “ice cube container is
full” is damaged.
Contact our service or a specialist.
The appliance is operating but
not producing ice cubes.
Blockage or leakage of the refrigerant
pipe.
Contact our service or a specialist.
The compressor is damaged.
The fan motor is defective.
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bomann EWB 6068 CB at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bomann EWB 6068 CB in the language / languages: English, German, Dutch, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 2.33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info