Manual Bomann EWB 6060 CB (page 10 of 50) (English, German, Dutch, French, Italian, Polish, Spanish)

814730

Zoom out

Zoom in

1/50

EWB6060CB_IM 25.08.22

17 Residual water - drainage opening

18 Ice cube container

19 Ice shovel

Warnings for the Use of the Appliance

WARNING:

• The refrigerant circuit of the appliance uses the refrig-

erant isobutane (R600a), a ammable natural gas with

high environmental sustainability. When transporting

and installing the appliance, prevent the appliance

from falling down. The refrigerant circuit must not get

damaged.

• When carrying the appliance by the handle, always

carry it straight and with both hands to avoid tilting the

handle.

CAUTION:

Please observe a waiting period of 2 hours before initial

operation and after moving the appliance for the refriger-

ant to settle. Otherwise the compressor can be damaged.

If the Refrigerant Circuit is Damaged

• Open ames and ignition sources must be avoided.

• Disconnect the mains plug.

• Ventilate the room in which the appliance is installed.

Notes for Use

Location

• Place the appliance on a stable, horizontal, water-resist-

ant and level surface. Maintain a gap of at least 15 cm to

walls or objects.

• Do not place the appliance on or directly next to heat

sources such as ovens, radiators, etc.

Assembly

Assemble the carrying handle by inserting the ends into the

holes in the housing. Make sure that it is rmly seated.

-Note: Once the carrying handle has been tted, it cannot

be removed!

Electrical Connection

1. Before inserting the plug into the socket. Make sure that

the mains voltage to be used matches that of the appli-

ance. You can nd this information on the nameplate.

2. Connect the appliance to a properly installed wall outlet.

Standby (Standby Mode)

• The POWER control lamp ashes.

• The last set ice cube size lights up.

Ice Cube Size

You may choose between 2 sizes:

- small (SMALL)

- large (LARGE)

Eco Save (Power Saving Mode)

Once the ice cube container is full the appliance switches

into standby mode.

You benet from better safety and lower energy consump-

tion.

Operation

When using the appliance for the rst time or if you have not

used it for a long time, clean the appliance as described in

the chapter “Cleaning and Maintenance”.

Making Ice Cubes

1. Make sure that the water tank cap on the bottom of the

appliance is tightly closed.

2. Open the lid and take out the ice cube container.

3. There is a lter at the bottom of the water tank. Make

sure that it is rmly inserted.

4. Fill the container with water to no more than the MAX

mark. Only use drinking water to make ice cubes.

- For best results, aim for a water temperature of

between 7 °C and 20 °C as well as an ambient tem-

perature of between 16 °C and 25 °C.

- If you want clear ice cubes, use chilled drinking water

which has rstly been boiled.

5. Now put the ice cube container back in and close the lid.

6. Select the desired ice cube size with the button. The

corresponding control lamp lights up.

7. Press the button to start ice cube production.

- For hygienic reasons do not use the ice cubes from

the rst cycle.

- The rst few ice cubes will be small depending on the

water temperature and ambient temperature. The ice

cubes will only grow larger in the following cycle.

- Due to fast freezing the ice cubes can look “milky”.

This is the air trapped in the water and does not inu-

ence the quality of the ice cubes.

8. Keep the lid closed during ice cube production. An ice

cube making cycle lasts between 8 and 10 minutes.

Stop Ice Cube Production

Press the button to stop ice cube production.

- If operation is manually interrupted, water which is no

longer needed is fed back to the water tank. Only then

will the appliance stop. Half-nished ice cubes remain

suspended on the cooling rods. As soon as it is suf-

ciently thawed, it will fall off and drop into the ice cube

container.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bomann EWB 6060 CB in the language / languages: English, German, Dutch, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 2.15 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bomann EWB 6060 CB Manual

Product: