651946
59
Zoom out
Zoom in
Previous page
1/98
Next page
59
ES1185CB_IM 04.03.16
Problem Possible cause Solution
The pump is
noisy.
Switch the appliance off.
The water tank is
empty.
Fill the water tank
with fresh water.
The water tank
is not properly
attached; the valve
is not open.
Press the tank
slightly down for the
valve to open.
Air entrapped in the
water circuit.
Bleed the appliance
as instructed under
“First Use / Bleed-
ing”.
Espresso
escapes at the
lter holder
edge.
Stop the brewing process!
The lter holder
is not properly
attached or is not
enough closed.
Attach the lter
holder properly as
instructed under
“Attach / Detach
Filter Holder”.
Too much coffee
grounds in the lter
insert.
Remove excess
coffee grounds.
Observe the MAX
marking in the lter
insert.
Coffee grounds
residues on the
rubber seal of the
group head.
Switch the appli-
ance off and let it
cool down.
Clean the rubber
seal as instructed.
After preparing milk
foam, the appliance
is still under
pressure.
Release the pres-
sure completely.
Pay attention
to item 4 of the
chapter “Making
Espresso”.
Espresso is too
cold.
The cups were not
pre-heated.
Rinse the cups with
hot water.
Indicator lamp “ok
does not light up
during the brewing
process.
Wait until the
indicator lamp “ok
lights up.
Coffee crema
is slightly
discoloured
(coffee runs out
fast).
The coffee grounds
are too coarse
or are not evenly
spread.
Use the supplied
tamper.
Too little coffee
grounds in the lter
insert.
Fill coffee grounds
only to MAX
marking in the lter
insert.
Problem Possible cause Solution
Coffee
crema is dark
discoloured
(coffee runs out
slowly).
The coffee grounds
are too ne or
compressed too
much.
Loosen the coffee
grounds. Spread
it evenly and only
slightly compress
with the tamper.
Too much coffee
grounds in the lter
insert.
Use less coffee
grounds. Observe
the MAX marking in
the lter insert.
No crema on
the espresso.
The espresso
grounds are not
suitable.
Change the brand,
if necessary.
The milk does
not froth.
The milk is not
suitable.
Use milk with at
least 3.5 % fat
content.
The milk is not cold
enough.
Use refrigerated
milk.
The steam nozzle
is dirty.
Clean the steam
nozzle as instructed.
The appliance
turns off auto-
matically.
This is not a
malfunction of the
appliance.
In order to
comply with the
Ecodesign Directive
(2009/125/EC), the
appliance turns off
automatically after
max. 30 minutes
after the brewing
process has
nished.
Technical Data
Model:.................................................................... ES 1185 CB
Power supply:............................................. 220 - 240 V~, 50 Hz
Power consumption: .......................................................850 W
Protection class: .......................................................................
Pressure: ......................................................................... 15 bar
Net weight: .......................................................... approx 3.1 kg
The right to make technical and design modications in the
course of continuous product development remains reserved.
This device has been tested according to all relevant current
CE guidelines, such as electromagnetic compatibility and low
voltage directives, and has been constructed in accordance
with the latest regulations.
59


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bomann ES 1185 CB at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bomann ES 1185 CB in the language / languages: English, German, Dutch, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 4,12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info