814387
32
Zoom out
Zoom in
Previous page
1/36
Next page
32
Cleaning the glass pane
If necessary, clean the inside of the glass panes.
Open the oven door.
Press in the opposite plastic fasteners of the re-
taining strip and remove the strip to the front at
the same time.
Carefully remove the glass pane from the holder
towards the front.
Replace the glass pane after you have cleaned
and thoroughly dried the glass.
Press the retaining strip firmly back into place.
Changing the bulb
WARNING:
Make sure that the appliance is turned off from
the power supply (fuse).
Allow the lamp to cool down before replacing the
bulb. There is risk of burns!
NOTE:
Use the correct bulb, heat resistant up to 300°C:
Type G9 - 220-240 V~ - 15 W
Unscrew the lamp cover, clean it with a dry cloth.
Change the bulb.
Screw the lamp cover on tightly and check for
proper operation.
Troubleshooting
Before you contact an authorized specialist
Problem
Possible cause / Action
Unit does not
work
Check the power supply.
Oven lamp
does not
work
Bulb is defective, was inserted in-
correctly, is not securely seated in
the socket, see
Changing the
bulb”.
Strong
smoke deve-
lopment
Grease residues in the oven
chamber, switch off the oven, al-
low to cool before cleaning.
NOTE:
If a problem persists after following the steps above,
contact your distributor or an authorized technician.
Technical data
Electrical connection…………………………...………..
Connection voltage: …………...380-415 V 3N~ 50 Hz
Rated power: ………..……………..…..…........7600 W
Rated current: ………………......……….........3 x 16 A
Protection class: ………………………...………I / IP20
Dimension H x W x D / weight……...……...………..
Oven dimension: ……..………..86,0 x 50,0 x 61,0 cm
Oven interior: .......approx. 31,5 x 34,5 x min. 40,0 cm
Net weight: ………………….…….......………...35,0 kg
The right to make technical and design modifications
during continuous product development remains re-
served.
This appliance has been tested according to all rele-
vant current CE guidelines, such as electromagnetic
compatibility and low voltage directives, and has
been constructed in accordance with the latest safety
regulations.
32


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bomann EHC 7939 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bomann EHC 7939 in the language / languages: English, German as an attachment in your email.

The manual is 1.06 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info