814386
35
Zoom out
Zoom in
Previous page
1/48
Next page
35
Do not interrupt the power supply of the appliance
during this process.
Automatic switch-off
If you have not set a cooking time or a timer function,
the oven switches off automatically after about 10
hours for safety reasons.
Timer functions
WARNING: Fire hazard! There is an increased
risk of fire when the timer is in operation!
Before starting, inform all household members so
that no one puts anything in the appliance.
Monitor the appliance during timer operation to
prevent food from overflowing and/or burning.
Be aware that fats, oils and alcohol can ignite dur-
ing frying.
Never grill unattended during timer operation!
GENERAL NOTES to the timer functions
While dot symbol (4) flashes between hour and
minute, you can make the setting.
The setting is saved some time after the last but-
ton is pressed. The display shows the time of day.
The Auto mode symbol (1) indicates that a func-
tion which ends the oven operation after preset
time is active.
Press the button in manual mode twice and
display the remaining time of the timer setting.
Using timer as reminder function (minute minder)
after XXXX hours
You can set the alarm independently of the opera-
tion. It does not influence the appliance.
Use the function e. g. as a reminder to add spices or
baste the food after a certain time.
Press the button twice for the alarm, the sym-
bol (3) lights up and the display shows [0000].
Set the alarm time up to 23 hours and 59 minutes
using the buttons and .
The symbol (3) for the alarm indicates that the
alarm time is activated.
After the alarm time has elapsed, the symbol (3)
flashes and several signal tones sound until any but-
ton is pressed. Otherwise, the signal tones continue
to sound for a few minutes.
Using timer to switch off operation after XXXX hours
Press the button three times for the cooking
time, the symbols (1) and (2) light up and the dis-
play shows [0000].
Set the cooking time up to 10 hours using the but-
tons and .
Select the desired heating function and tempera-
ture to start the operation.
Using timer to switch off operation at XXXX o’clock
Press the button four times for the cooking
stop, the symbols (1) and (2) light up and the dis-
play shows [0000].
Set the time of day at which the operation should
switch off using the buttons and .
Select the desired heating function and tempera-
ture to start the operation.
Using timer to delay cooking time and to switch off
operation at XXXX o’clock
First set the cooking time as under
"Using timer to
switch off operation after XXXX hours
.
Immediately press the button for the cooking
stop again and set the time as under
"Using timer
to switch off operation at XXXX o’clock"
.
Select the desired heating function and tempera-
ture.
The appliance uses the previously set cooking time
to calculate the time of day at which the operation will
start automatically to reach the selected time of day
for switch off.
35


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bomann EHBC 7937 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bomann EHBC 7937 in the language / languages: English, German as an attachment in your email.

The manual is 1.24 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info