687854
7
Zoom out
Zoom in
Previous page
1/20
Next page
7
Cabinet opening and appliance dimensions
Cabinet opening and appliance dimensionsCabinet opening and appliance dimensions
Cabinet opening and appliance dimensions
Prepare the cabinet opening according to the dimen-
sional drawings.
Dimensions in mm
Preparing the worktop for
Preparing the worktop for Preparing the worktop for
Preparing the worktop for installation of the hob
installation of the hobinstallation of the hob
installation of the hob
CAUTION:
CAUTION:CAUTION:
CAUTION:
Before cutting secure the outer cutout edge with wide
adhesive tape to avoid traces of jigsaw on the work-
top.
The worktop must be leveled horizontally and be
sealed on the wall side against overflowing liquids
or moisture.
The hob must be completely surrounded by min.
50 mm work surface.
The cut surfaces (cutout edges) must be sealed
with special varnish, silicone rubber or cast raisin
in order to prevent swelling caused by humidity.
Clean and dry the worktop in the cutout area
thoroughly.
Worktop cutout
Worktop cutoutWorktop cutout
Worktop cutout
Prepare the cutout of the worktop according to the
dimensional drawing.
Dimensions in mm
Installing the hob
Installing the hobInstalling the hob
Installing the hob
NOTE
NOTENOTE
NOTE:
::
:
To avoid damage, place the hob with the top of the
cooking surface on a padded base.
First check the factory fitted hob seal at the hob
frame to the integrity and the proper fit.
Attach the enclosed retaining clamps with the
screws in the provided holes laterally of the hob.
Place the hob according to the hob drawing under
"Appliance Overview" and with the connecting ca-
ble first centrally into the prepared cutout of the
worktop.
Make sure that the distances to the cutting are
equal on all four sides and that the seal is resting
on the worktop.
Installing the oven
Installing the ovenInstalling the oven
Installing the oven
Put the appliance with the connecting cable first
into the prepared cabinet a bit.
Do the connection to the hob as well as to the
mains, see "Electrical connection".
Insert the oven into the cabinet opening complete-
ly. Make sure that the cables does not restricted
(bent, squeezed or twisted).
Attach and secure the oven by using the supplied
screws on the side walls of the cabinet.
The provided mounting holes
(A) are visible after opening
the oven door on the left and
right frame
Electrical
Electrical Electrical
Electrical connection
connectionconnection
connection
Information for the
Information for the Information for the
Information for the authorized expert
authorized expertauthorized expert
authorized expert
WARNING:
WARNING:WARNING:
WARNING:
The installation to the mains supply must conform
to the local standards and regulations.
Connecting the appliance to a domestic power
socket or using multiple sockets or extension ca-
bles is not permitted.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bomann EHBC 560.1 IX at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bomann EHBC 560.1 IX in the language / languages: English as an attachment in your email.

The manual is 0,67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bomann EHBC 560.1 IX

Bomann EHBC 560.1 IX User Manual - German - 24 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info