651983
8
Zoom out
Zoom in
Previous page
1/20
Next page
Attach and secure the oven by
using the
net
. The provided mounting holes (A) are visible after opening the o
and right frame.
Electrical connection
Electrical connectionElectrical connection
Electrical connection
Information for the
Information for the Information for the
Information for the
authorized expert
authorized expertauthorized expert
authorized expert
WARNING
WARNINGWARNING
WARNING:
::
:
The installation to the mains supply must conform to the local standards and regulations.
Connecting the appliance to a
domestic power
permitted.
Improper connection may cause to an
Before connecting, ensure that the power supply corresponds with the information on the rating label and
the wiring diagram.
Make sure to connect the protective ground to the terminal of
The electrical installation of the oven should be equipped with an emergency switch, which switches off the
whole appliance from the mains supply in an emergency. The
gency switch must be at least 3 mm.
The appliance is suitable for three
The
appliance can be adjusted for single
based on the circuit diagram below. Select a suitable cord as mains cable, considering the connection type
and nominal power of the oven.
Fix the mains cable in the tension relief.
Arrange the mains cable in such a way that it does not get in contact with
ance. Do not lead it over sharp edges or corners.
Connecting the hob with the oven
Connecting the hob with the ovenConnecting the hob with the oven
Connecting the hob with the oven
Insert the plugs
at the end of the hob
Connection wiring diagram
Connection wiring diagramConnection wiring diagram
Connection wiring diagram
Permissible connection methods
Permissible connection methodsPermissible connection methods
Permissible connection methods
CAUTION
CAUTIONCAUTION
CAUTION:
::
:
Voltage of heating element is
230V.
Each connection requires the protective ground of the mains
to be connected to the PE
terminal.
8
using the
supplied
screws on the side walls of the cab
. The provided mounting holes (A) are visible after opening the o
ven door on the left
authorized expert
authorized expertauthorized expert
authorized expert
The installation to the mains supply must conform to the local standards and regulations.
domestic power
socket or using multiple sockets or extension cables is not
Improper connection may cause to an
electric shock
electric shockelectric shock
electric shock!
Before connecting, ensure that the power supply corresponds with the information on the rating label and
Make sure to connect the protective ground to the terminal of
the marked terminal block.
The electrical installation of the oven should be equipped with an emergency switch, which switches off the
whole appliance from the mains supply in an emergency. The
distance between the contacts of the eme
gency switch must be at least 3 mm.
The appliance is suitable for three
-phase and AC current (400V 3N~50Hz).
appliance can be adjusted for single
-
phase current by a respective bypass on the terminal block,
based on the circuit diagram below. Select a suitable cord as mains cable, considering the connection type
Fix the mains cable in the tension relief.
Arrange the mains cable in such a way that it does not get in contact with
any hot components of the appl
ance. Do not lead it over sharp edges or corners.
A
AA
A
Terminal block for the hob connection
B
BB
B
Socket for power supply
To
unlock the socket for the power supply, locate a s
and move it slightly downwards (2).
at the end of the hob
circuit group in the appropriate socket
of the oven terminal block.
230V.
Each connection requires the protective ground of the mains
terminal.
screws on the side walls of the cab
i-
ven door on the left
The installation to the mains supply must conform to the local standards and regulations.
socket or using multiple sockets or extension cables is not
Before connecting, ensure that the power supply corresponds with the information on the rating label and
the marked terminal block.
The electrical installation of the oven should be equipped with an emergency switch, which switches off the
distance between the contacts of the eme
r-
phase current by a respective bypass on the terminal block,
based on the circuit diagram below. Select a suitable cord as mains cable, considering the connection type
any hot components of the appl
i-
Terminal block for the hob connection
unlock the socket for the power supply, locate a s
rewdriver (1)
of the oven terminal block.
Recomme
RecommeRecomme
Recommen-
n-n-
n-
ded connect
ded connectded connect
ded connecti-
i-i-
i-
on method
on methodon method
on method
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bomann EHBC 555 IX at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bomann EHBC 555 IX in the language / languages: English as an attachment in your email.

The manual is 1,02 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bomann EHBC 555 IX

Bomann EHBC 555 IX User Manual - German - 24 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info