688071
6
Zoom out
Zoom in
Previous page
1/16
Next page
Installation
InstallationInstallation
Installation
WARNING:
WARNING:WARNING:
WARNING:
The installation
and the connection to the main power
may only be performed by an authorized specialist.
CAUTION
CAUTIONCAUTION
CAUTION:
::
:
The worktop
, the cabinet, veneers
ings, used
adhesives etc. must be sufficient
resistant.
The appliance
must be installed so that heat can
be dis
sipated. The ventilation openings (D) and
(E) must not be blocked.
The distance between the
hob and an extractor
hood must be at least as large as specified in the
instructions of the extractor hood!
Below the cutout must remain a minimum di
tance. In this area are not allowed heat
objects (cabinet, drawer, etc.). Possibly existing
side
walls or drawer boxes must be sawed accor
ingly or removed.
Keep safety distances; sufficient air circulation
must be ensured:
A
AA
A
760 mm
B
BB
B
50 mm
C
CC
C
20 mm
D
DD
D
Air intake
E
EE
E
Air outlet (5 mm)
Preparing the worktop for installation of the hob
Preparing the worktop for installation of the hobPreparing the worktop for installation of the hob
Preparing the worktop for installation of the hob
CAUTION:
CAUTION:CAUTION:
CAUTION:
Before cutting secure the outer cutout edge with wide
adhesive tape to avoid traces of jigsaw on the wor
top.
The worktop must have a thickness between
28 mm and 40 mm, it must be leveled horizontally
and are sealed to the wall side against
ing liquids or moisture.
6
and the connection to the main power
may only be performed by an authorized specialist.
, the cabinet, veneers
, plastic coat-
adhesives etc. must be sufficient
heat-
must be installed so that heat can
sipated. The ventilation openings (D) and
hob and an extractor
hood must be at least as large as specified in the
instructions of the extractor hood!
Below the cutout must remain a minimum di
s-
tance. In this area are not allowed heat
-sensitive
objects (cabinet, drawer, etc.). Possibly existing
walls or drawer boxes must be sawed accor
d-
Keep safety distances; sufficient air circulation
760 mm
50 mm
20 mm
Air intake
Air outlet (5 mm)
Preparing the worktop for installation of the hob
Preparing the worktop for installation of the hobPreparing the worktop for installation of the hob
Preparing the worktop for installation of the hob
Before cutting secure the outer cutout edge with wide
adhesive tape to avoid traces of jigsaw on the wor
k-
The worktop must have a thickness between
28 mm and 40 mm, it must be leveled horizontally
and are sealed to the wall side against
overflow-
The hob must be
completely surrounded by min.
50 mm work surface.
The cut surfaces (cutout edges) must be sealed
with special varnish, silicone rubber or cast raisin
in order to prevent swelling caused by humidity.
Clean
and dry the worktop in the cutout area
thoroughly.
Worktop cutout
Worktop cutoutWorktop cutout
Worktop cutout
Prepare the cutout of the worktop according to the
dimensional drawing.
Dimensions in mm
L
LL
L
W
WW
W
H
HH
H
D
DD
D
590 520 55 51
S
S S
S Seal below the hob
Installing the hob
Installing the hobInstalling the hob
Installing the hob
First check the factory fitted hob seal at the hob
frame to the integrity and the proper fit.
Affix the brackets (1) to the
of the hob
with the screws (3).
Put the hob with the connecting cable first and
with the control panel to the front into the pr
pared cutout.
Make sure that the distances to the cutting are
equal on all four sides and that the seal is resting
on the worktop.
completely surrounded by min.
The cut surfaces (cutout edges) must be sealed
with special varnish, silicone rubber or cast raisin
in order to prevent swelling caused by humidity.
and dry the worktop in the cutout area
Prepare the cutout of the worktop according to the
A
AA
A
B
BB
B
X
XX
X
560 490 50
1
11
1
Bracket
2
22
2
Drilling
3
33
3
Screw
A
AA
A
Worktop
B
BB
B
Hob bottom
1
11
1
Bracket
3
33
3
Screw
First check the factory fitted hob seal at the hob
frame to the integrity and the proper fit.
Affix the brackets (1) to the
provided drillings (2)
with the screws (3).
Put the hob with the connecting cable first and
with the control panel to the front into the pr
e-
Make sure that the distances to the cutting are
equal on all four sides and that the seal is resting
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bomann EBKI 961 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bomann EBKI 961 in the language / languages: English as an attachment in your email.

The manual is 0,52 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bomann EBKI 961

Bomann EBKI 961 User Manual - German - 20 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info