814383
23
Zoom out
Zoom in
Previous page
1/36
Next page
23
by the manufacturer, its service agent or similarly qualified persons to
avoid a hazard.
Transport and packaging
Transport the appliance
Secure the appliance sufficiently and protect it
against weather during transport.
Unpacking the appliance
Remove the appliance from its packaging.
Remove all packaging material, such as foils, filler
and cardboard packaging.
Dispose of packaging materials that are no longer
required in accordance with the locally applicable
regulations.
To prevent hazards, check the appliance for any
transport damage.
In case of damage, do not put the appliance into
operation. Contact your distributor.
NOTE:
Production residue or dust may have collected on the
appliance. We recommend cleaning the appliance
according to chapter
“Cleaning and maintenance”
.
Appliance equipment
Appliance overview
1
Control panel
2
Ø215 mm / 2200 W
(booster 2300)
3
Ø165 mm / 1200 W
(booster 1500 W)
4
Ø185 mm / 1800 W
(booster 2100 W)
5
Ø165 mm / 1200 W
(booster 1500 W)
Delivery scope
Installation material:
4x retaining clip, 4x fixing screw,
1x sealing tape
Installation
The hob is designed for installation in standard
kitchen units.
Before installation, make a note of the serial number,
which you will find on the rating label (hob base).
WARNING:
The installation and the connection to the
main power may only be performed by an
authorized specialist.
Risk of cutting injuries!
Beware of cutting edges on the appliance.
Recommendation, wear protective gloves when
installing / transporting the appliance to avoid
injury from possible sharp edges.
CAUTION:
The worktop, the cabinet, veneers, plastic coat-
ings, used adhesives etc. must be sufficient heat-
resistant (min. 100°C).
Do not mount the hob above cooling equipment,
dishwashers and tumble dryers.
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bomann EBKI 7942 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bomann EBKI 7942 in the language / languages: English, German as an attachment in your email.

The manual is 0.85 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info