651979
16
Zoom out
Zoom in
Previous page
1/20
Next page
16
Use 2 screws ST4*8 to fix outside chimney on the
hood, and then use screws ST4*40 to fix outside
chimney on the wall.
Pull out the inside chimney and fix the chimney on
the wall.
For the extraction mode:
For the extraction mode:For the extraction mode:
For the extraction mode:
Attach a flexible extraction hose (not
supplied) with an inner diameter of
Ø150 mm onto the connecting piece.
Installing the activated carbon
Installing the activated carbonInstalling the activated carbon
Installing the activated carbon
filter for recirculation
filter for recirculation filter for recirculation
filter for recirculation
mode
modemode
mode
Open the cover and remove the aluminum grease
filter.
Place the carbon filter onto the air intake of the
extraction duct. Make sure that the mounting pins
on the extraction duct engage the mounting slots
of the carbon filter. Turn the filter clockwise until it
clicks into place.
Reinstall the aluminum grease filter and close the
cover.
Electrical connection
Electrical connectionElectrical connection
Electrical connection
WARNING:
WARNING:WARNING:
WARNING:
The installation to the mains supply must conform
to the local standards and regulations.
Improper connection may cause to an electric
electric electric
electric
shock
shockshock
shock!
Do not modify the appliance plug. If the plug does
not fit properly to the outlet, let install a proper
outlet by an authorized specialist.
The accessibility of the power plug must be en-
sured to disconnect the appliance from the power
supply in case of emergency.
Ensure that your mains power corresponds with
the specifications of the appliance. The specifica-
tions are printed on the rating label.
Connect the mains cable to a properly installed
and earthed wall outlet.
If the plug after installation is not accessible, a
corresponding disconnect device must be availa-
ble to meet the relevant safety regulations.
Startup /
Startup /Startup /
Startup /
Operation
OperationOperation
Operation
The cooker hood is operated via Touch Control.
Settings
SettingsSettings
Settings
Power leve
Power levePower leve
Power level
ll
l: Display shows “1”, “2” or “3”.
Power level
Power levelPower level
Power level
1
11
1:
: :
: Suitable for cooking on a low flame
and for dishes which produce no or little steam, in
order to circulate the air around the kitchen.
Power level
Power levelPower level
Power level
2
22
2:
: :
: Suitable for normal cooking.
Power level
Power levelPower level
Power level
3
33
3:
: :
: Suitable if large quantities of smoke
and steam need to be extracted or filtered (e.g. when
frying).
Delay time: The button only works, when the
motor is working. The max. delay time is 9 minutes.
By pressing this button, the time decreases for 1
minute each.
NOTE
NOTENOTE
NOTE:
::
:
With very strong vapor emission, the fan should con-
tinue running after cooking for a few minutes.
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bomann DU 771 G at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bomann DU 771 G in the language / languages: English, German as an attachment in your email.

The manual is 0,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info