651968
19
Zoom out
Zoom in
Previous page
1/28
Next page
1
The hood is mounted below a suitable wall unit. Determine the position of the extractor hood centrally
above the hob in
conformance with the specified safety distances.
Pull the pull-out device and re
move
Hold the hood to the specified
cabinet
sponding to the six screw holes.
Check
For extraction mode, you must
also
If the mains cable is fed through
the
Drill six mounting holes of
Ø 4 mm
Screw in the appli
ance with the screws (1)
Insert the connecting piece with
non
the mounting hooks on the
connecting piece
For extraction mode, a flexible
extraction
fitted and connected to the
outside
To fill the gap between the wall
and
depending on the gap. Mount the
Reinstall the aluminum grease
filter.
I
II
Installing the activated carbo
nstalling the activated carbonstalling the activated carbo
nstalling the activated carbo
n filter for recirculation mode
n filter for recirculation moden filter for recirculation mode
n filter for recirculation mode
Pull the pull-out device and r
emove the aluminum grease filter.
Place the carbon filter onto the air intake of the extraction duct. Make sure that the mounting pins on the
extraction duct engage the mounting slots of the carbon filter. Turn the respective filter clockwise u
clicks into place.
Reinstall the alumin
um grease filter
NOTE
NOTENOTE
NOTE:
::
:
The activated carbon filter absorbs
odours
19
2 3
The hood is mounted below a suitable wall unit. Determine the position of the extractor hood centrally
conformance with the specified safety distances.
move
the aluminum grease filter.
cabinet
position and draw the drilling points from
the
Check
them with a spirit level.
also
create a feed through of approx. Ø 130 mm in
the
unit, a feed through also must be provided.
Ø 4 mm
through the base of the unit.
ance with the screws (1)
and washers under the wall unit.
non
-return valves (2) onto the extraction duct
from
connecting piece
latch into place.
extraction
hose (not supplied) with an inner
diameter
outside
by an extraction vent.
and
the appliance, attach the spacer strip
(3) on t
strip using the screws (4) in the holes provided
on
filter.
n filter for recirculation mode
n filter for recirculation moden filter for recirculation mode
n filter for recirculation mode
emove the aluminum grease filter.
Place the carbon filter onto the air intake of the extraction duct. Make sure that the mounting pins on the
extraction duct engage the mounting slots of the carbon filter. Turn the respective filter clockwise u
um grease filter
.
odours
and must be replaced at least every six
months
4
The hood is mounted below a suitable wall unit. Determine the position of the extractor hood centrally
the
inside of the unit corre-
the base of the unit.
from
above. Make sure that
diameter
of Ø 120 mm must be
(3) on t
he narrow or wide side,
on
the appliance.
Place the carbon filter onto the air intake of the extraction duct. Make sure that the mounting pins on the
extraction duct engage the mounting slots of the carbon filter. Turn the respective filter clockwise u
ntil it
months
regardless of use.
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bomann DU 660 IX at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bomann DU 660 IX in the language / languages: English, German as an attachment in your email.

The manual is 0,99 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info