688047
19
Zoom out
Zoom in
Previous page
1/28
Next page
19
NOTE
NOTENOTE
NOTE:
::
:
*
**
*Delivery scope!
Keep the parts to be replaced for another possible
door stop change.
Loosen the hinge cover and the blind cap on the
appliance top. Disassemble the upper door hinge;
lift out the upper unit door.
Move the hinge pin holder on the door top side.
Release the doorstop and fasten the delivered
doorstop* on the other door underside. Set the
door safely aside.
Disassemble the middle door hinge; lift out the
lower unit door.
Move the hinge pin holder on the door top side.
Release the doorstop and fasten the delivered
doorstop* on the other door underside. Set the
door safely aside.
Tilt the unit slightly backwards and lock it in this
position. Unscrew the feet and disassemble the
lower door hinge.
Transfer and fasten the lower door hinge to the
opposite appliance side after unscrewing the
hinge pin and replacing it from the other hinge
side. Screw in the feet.
Put the appliance back in the upright position.
Move the blind plugs on the exposed holes of the
middle door hinge.
Put on the lower door and fix it in its intended
position.
Turn the middle door hinge about 180°, transfer
and fasten it to the opposite appliance side.
Put on the upper appliance door and fix in its in-
tended position.
Transfer and fasten the upper door hinge to the
opposite appliance side after unscrewing the
hinge pin and replacing it from the other hinge
side.
Attach the enclosed hinge cover* and the blind
cap on the appliance top.
Check that the doors are aligned vertically and hori-
zontally to ensure proper opening and closing of the
doors.
Startup / Operation
Startup / OperationStartup / Operation
Startup / Operation
Prior to first use
Prior to first usePrior to first use
Prior to first use
CAUTION
CAUTIONCAUTION
CAUTION:
::
:
After transport, the appliance should be left standing
upright for four hours before connecting to the power
supply. Nonobservance could lead to malfunction of
the cooling system and causes an appliance break-
down.
Clean the appliance interior including all accessory
parts. Consider the instructions which we provide in
the chapter “Cleaning and Maintenance”.
Startin
StartinStartin
Starting the appliance
g the applianceg the appliance
g the appliance
Connect the appliance to the power supply.
Operate the temperature control. See also the
section "Settings".
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bomann DT 7311 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bomann DT 7311 in the language / languages: English, German as an attachment in your email.

The manual is 0,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info