651938
49
Zoom out
Zoom in
Previous page
1/94
Next page
49
Terminating operation
Press the ON/OFF switch. The display-lighting and the pilot
lamp will go out. All settings will be reset.
Overheat protection
When the water is used up, the device will turn off after some
time. All settings will be reset. A signal tone will sound. The
display backlight and control lamp will turn off.
WARNING:
The device is still connected to the mains!
Terminate operation by disconnecting the plug. Or rell with
cold water.
NOTE:
The device will always switch into standby mode auto-
matically after the heating element has cooled down.
The display and the pilot lamp will light up blue. The ap-
pliance is ready for use.
This procedure might take up to 30 minutes, depending
on whether or not you have relled with water.
If you would like to continue operation, set the steaming
time again.
Adding more water
At maximum water level (1 liter) the water will be used up after
approx. 50 minutes.
Please observe the water level indicator. We recommend to
already relling with water as soon as the water reaches the
MIN marking. It is possible to do so during operation.
Use a measuring cup.
Add water through the
water inlet.
Fill the reservoir till the
MAX level.
Stop operation
1. Press the ON/OFF switch. The display-lighting and the pilot
lamp will go out.
2. Disconnect the plug from the mains.
WARNING:
Always use pot holders or oven mitts when handling or
removing hot components in order not to get burned by
hot steam!
The liquid in the collection tray is hot!
3. Remove the steam bowls rst and the collection tray last.
Cleaning
WARNING:
Before cleaning, always disconnect the mains plug and wait until
the device has cooled down completely.
Do not immerse the base unit of the steamer in water for cleaning.
This might otherwise cause electric shock or re.
CAUTION:
Do not use wire brushes or other abrasive objects.
Do not use sharp or abrasive cleaning agents.
Surface of base unit
Wipe the surface of the base unit only with a damp cloth
and dry with a soft cloth afterwards.
Reservoir
Pour the remaining water from the reservoir.
Use a cloth to wipe the reservoir dry.
Lid, steam bowls, collection tray, rice bowl
CAUTION:
Do not clean these parts in the dishwasher. The clear plastic
surfaces could otherwise tarnish.
Clean these parts manually in soapy water.
Rinse under clear water and dry afterwards.
Descaling
In hard water areas scale might build up on the heating ele-
ment. This might result in the steam turning off before the food
is cooked.
49


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bomann DG 2286 CB at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bomann DG 2286 CB in the language / languages: English, German, Dutch, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 8,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info