Manual Bomann DBS 783 CB (page 41 of 74) (English, German, Dutch, French, Italian, Polish, Spanish)

651922

Zoom out

Zoom in

1/74

CAUTION: Initial use:

4. If the handle is still in the carrying position, release the

lock as described under “Function of the Handle”.

5. Use the selector button SET (11) to set the temperature.

Refer to the table above.

6. Wait until the sole plate has heated up. The operating

temperature is reached as soon as the blue indicator

stops ashing and a beep sounds.

7. Press the steam jet button (1) for at least ½minute. As

an alternative, you can pull back the lock (9) to lock the

steam jet button (10). This time is needed for the steam

to reach the iron. A slightly louder noise of the pump is

normal with this.

NOTE ON STEAM IRONING:

• Setting

is not intended for steam ironing (see table).

• The amount of steam is electronically controlled. It is

based on the ironing temperature.

• The ironing temperature is electronically controlled during

use. The device heats up if the blue indicator on the

display starts ashing slowly.

After use, press the selector button SET (11) repeatedly until

the red control lamp appears in the display. Disconnect the

mains plug from the socket.

Vertical Steam function (Vertical Steam)

This can be used to produce a jet of steam in a vertical direc-

tion. This function can be used to remove creases from hanging

clothes or from curtains.

WARNING:

Never point the steam jet at other people. Danger of burns.

Hang your laundry on a clothes hanger and move the iron to

approximately 5-15 cm away.

How can I replenish the water during operation?

Rell with water before the tank is completely empty. A loud noi-

se of the pump during operation indicates that the water level is

too low.

1. Place the iron on the rest (5).

2. Press the selector button SET (11)

repeatedly until the red control

lamp appears in the display.

3. Remove the mains plug from the

socket.

4. In order to remove the tank, press

the RELEASE button below the

water tank. (Fig. C).

5. Remove the lime lter cartridge

(Fig. D).

6. Fill the tank up to the maximum

mark (Fig. E). Do not overll!

7. Reinsert the lime lter cartridge

and push the tank back into

the base (Fig. F + G). A “click“

conrms that the water tank has

been set correctly.

8. You can now continue ironing.

NOTE:

The tank illumination lights once the mains plug has been

inserted into the outlet. If it does not light, the lime lter

cartridge or the water tank has not been set correctly. Check

both positions.

When you have nished

1. Press the selector button SET (11) repeatedly until the red

control lamp appears in the display. Remove the mains

plug from the socket. The light on the display goes out.

2. Allow the device to cool down before you put it away.

Anti-scale lter

Your steam iron station is tted with an anti-scale lter. The anti-

scale lter cartridge becomes spent after ltering approximately

18 litres of water, depending on the hardness of your water. It

then loses its effectiveness and must be replaced.

1. Turn off the appliance.

2. Disconnect the mains plug from the mains.

3. Remove the water tank.

4. Remove the anti-scale lter cartridge.

5. Fill the tank up to the maximum mark. Do not overll!

6. Insert a new anti-scale lter cartridge.

7. Before turning on the appliance, wait a few minutes until

the new lter cartridge is saturated with water.

NOTE:

If you do not have a new anti-scale lter cartridge, you can

still iron with the used cartridge and distilled water.

Cleaning

WARNING:

• Always remove the mains lead before cleaning!

• Wait until the machine has cooled down completely.

• Under no circumstances should you immerse the device

in water for cleaning purposes. Otherwise this might

result in an electric shock or re.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bomann DBS 783 CB in the language / languages: English, German, Dutch, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 7,09 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bomann DBS 783 CB Manual

Product: