Manual Bomann dbs 762 cb (page 26 of 42) (English, German, Dutch, French, Italian, Polish, Portuguese, Spanish, Norwegian)

323004

Zoom out

Zoom in

1/42

ENGLISH

Connected Wattage

The station has a total maximum wattage of 2000 W. With this

connected load a separate supply line protected by a 16 A

household circuit breaker is recommended.

CAUTION:

Warning - Danger of Overload! Do not use any extension

leads or multiple sockets as this device is too powerful.

Using the Machine

Ironing without steam

1. Sort out the garments according to their ironing temperatu-

res.

2. Always set the temperature control to „MIN“ before connec-

ting the appliance to a power point, or before disconnecting

it.

3. Electrical connection:

• Make sure that the iron voltage (see name plate) and

the line voltage match.

• Only connect the machine to a properly installed safety

socket, 230 V/50 Hz.

4. Start with the lower temperatures. It is set with the thermos-

tat (1):

• Synthetics, silk low temperature

• • Wool medium temperature

• • • Cotton, linen high temperature

MAX maximum temperature

5. Place the iron on its stand.

6. The control lamp on the handle of the iron shows that it

is heating up. As soon as the control lamp goes off the

operating temperature has been reached. Now you can start

ironing. Always turn the temperature control to MIN after use

and remove the mains plug (the control lamp in the handle

goes off).

Steam Ironing

For this a high temperature is needed.

1. Turn the temperature control (1) to position „• • •“ (cotton,

linen).

2. Turn the O/I operating switch (10) on the station to position

I. The control lamp in the switch shows that it is on standby.

When the control lamp (5) lights up there is enough steam

for steam operation.

WARNING:

The steam is hot! There is a danger of scalding!

3. With the steam jet button „

“ you can create a short and

powerful jet of steam.

How can I replenish the water during operation?

If the pressure falls during operation you can ﬁ ll more water into

the tank at the same time.

1. First turn operating switch to O (The lamp in the I/O switch

goes off).

ޥ NOTE:

If there is still some residual pressure in the water tank, a

safety lock prevents the water tank catch (7) from being

opened.

WARNING:

The residual pressure ﬁ rst has to be relieved before

the device can be safely opened.

3. With the steam jet button „

“ you can now release the

residual steam pressure. If no more steam comes out of the

soleplate, please remove the plug and release the water

tank lock (7) carefully.

WARNING:

The steam is hot! There is a danger of scalding!

ޥ NOTE:

If it is not yet possible to open the lock of the water tank

the device needs a further 2 to 3 minutes to cool down.

Then release the residual pressure again.

4. Use the funnel (12) to ﬁ ll pure distilled water from a measu-

ring beaker into the water tank. Do not overﬁ ll! Take care of

water splashes that might come out of the boiler. In order to

prevent the water from splashing it should be ﬁ lled into the

funnel slowly after the safety lock has been opened.

5. Fasten the safety lock again.

6. Insert the power plug back into the socket.

7. Always turn the temperature control to MIN after use, turn

the operating switch (10) to O and remove the mains plug

from the socket (the lamp in the I/O switch goes off).

WARNING:

Never open the water tank lock while the device is being

operated.

When ironing at low temperatures, please ensure that you do

not use any steam.

Vertical Steam

This can be used to produce a jet of steam in a vertical direction.

Self-Cleaning

Due to the large amount of heat produced and the pressure

of the steam, residues that form in the soleplate are removed

automatically.

05-DBS 762 CB 26 15.08.2006, 11:26:27 Uhr

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bomann dbs 762 cb in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Spanish, Norwegian as an attachment in your email.

The manual is 2,24 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bomann dbs 762 cb Manual

Product: