379826
22
Zoom out
Zoom in
Previous page
1/32
Next page
22
Questions & Answers on Bread Baking Machines
Cause
The ingredients stick to the bak-
ing compartment or on the out-
side of the baking tin
The bread is left too long in the
tin after baking and warming.
The bottom of the loaf is stuck
to the kneading peg.
Incorrect program setting.
The START/STOPP key was
touched while the machine was
working.
The lid opened several timers
while the machine was working.
Long blackout while the
machine was working.
The rotation of the kneading
peg is blocked.
The appliance is still hot after
the previous baking procedure.
Program or electronic error.
Solution
Pull out the plug and clean the outside of
the baking tin or the baking compart-
ment.
Take the bread out of the baking tin befo-
re the warming function is over.
Clean the kneading hooks and shaft after
the baking. If necessary, fill the baking tin
with warm water for 30 minutes. Then the
kneading pegs can be easily removed
and cleaned.
Check the selected menu and the other
settings.
Do not use the ingredients and start over
again.
The lid is to be opened only if the time
left on the display is more than 1:30
hours (only for programmes „1, 2, 3, 4“).
Make sure that lid was closed well after
being opened.
Do not use the ingredients and start over
again.
Check that the kneading peg are blocked
by grains, etc. Pull out the baking tin and
check whether the drivers turn. If this is
not the case, send the appliance to the
customer service.
Press the START/STOPP button until the
normal programme appears. Pull out the
plug. Take out the baking tin and leave it
to cool at room temperature. Then insert
the plug and start again.
Start the test run by pulling out the plug,
keeping the menu key pressed and inser-
ting the plug again.
Release the key. The menu performs a
test run. Unplug again and then plug in
again. The normal program should appe-
ar on the display. If this is not the case,
send the appliance to the Customer
Service.
Problem
Smoke comes out of the
baking compartment or of
the vents
The bread goes down in the
middle and is moist on the
bottom.
It is difficult to take the
bread out of the baking tin.
The ingredients are not
mixed or the bread is not
baked correctly.
The appliance does not
start. The time acoustic sig-
nal goes off. The display
shows E 01.
„EEE“ or a similar signal
appears on the display.
5....-05-CB 578 GB1 23.05.2003 10:30 Uhr Seite 22
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bomann cb 578 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bomann cb 578 in the language / languages: English, German as an attachment in your email.

The manual is 1,09 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info