Manual Bomann cb 2001 (page 22 of 54) (English, German, Dutch, Italian)

361436

Zoom out

Zoom in

1/54

ENGLISH

Entering the Water Hardness

The time of descaling the

machine is determined

automatically from the

water consumption and

can be adapted to the

water hardness in 3 steps.

Please ask your local

drinking water supplier

about the degree of

hardness of the water in

your area.

• Go to the „setting the water hardness“ menu item.

• The „Recover” symbol ﬂ ashes.

• Press the

button to reduce the degree of

hardness.

• Press the

button to increase the degree

of hardness. The “normal” setting is shown in the

display by two arrowheads in the middle. In the soft

water setting the arrowheads are on the left, while

in the hard water setting they are on the right. The

preset is “high”.

• Save the changes with the MENU/OK/MEMORY

button.

Total Number of Prepared Cups

You can call up the total number of prepared cups. To do

so you have to change to the programming mode.

• Keep the MENU/OK/MEMORY button pressed

down for ﬁ ve seconds. In the display the symbols for

“normal cup” and “M” ﬂ ash. The arrowheads go off.

• Press the MENU/OK/MEMORY button until two cof-

fee cup symbols ﬂ ash simultaneously in the display.

The total number of prepared cups is shown by ar-

rowhead pairs. Each of the arrowhead pairs on the edge

of the display stands for 500 prepared cups.

Cleaning and Maintenance

Dismantling of the machine or working inside it is

strictly forbidden.

If the machine is kept clean and well looked after it will

produce coffee of an optimum quality and will have a

long service life.

Caution! Do not allow any moisture to penetrate the

housing. Otherwise there is a danger of an electric

shock.

The fully automatic coffee machine should never be

cleaned with aggressive, abrasive or caustic detergents

which might attack the surface of the machine.

Before the machine is cleaned it must be switched

off by the I/O mains switch (5) and the mains plug

removed from the socket.

• Before cleaning the machine please wait until it has

cooled down.

• Never immerse the machine in water or other liquids.

• Do not clean any of the machine parts in the dish-

washer.

• The machine parts should always be dried by hand

and never placed in a cooker or microwave oven to

dry.

Cleaning the Exterior of the Machine

• Clean the exterior of the machine and the accesso-

ries with a damp soft cloth.

• The machine has an integrated rotating plate for

easier handling and cleaning.

Cleaning the Water Tank

• Remove the water tank (4).

• Rinse out the water tank with fresh water.

• Reinstall the water tank.

Cleaning the Coffee Grinding Mechanism

Never ﬁ ll the coffee bean container (2) with water.

This may damage the machine!

Only the supplied brush should be used to clean the

container. Water or other liquids must never be used.

The coffee grinding mechanism does not require any

servicing.

Hot Water/Steam Nozzle

The steam pipe and the Maxi cappuccino device should

be cleaned after every use. In order to ensure that the

Maxi cappuccino device is cleaned thoroughly it can be

removed (pull downwards out of the steam pipe).

Rinse the Maxi cappuccino device thoroughly with warm

water. Wipe the steam pipe off with a damp cloth.

Cleaning the Coffee Spout

The coffee spout (13) can be removed for cleaning. Press

the coffee spout into the top position beforehand.

• Press on the clip to release the

locking mechanism (A).

• Tilt the coffee spout towards the

machine (B).

• Then remove the coffee spout by

pulling it downwards (C).

• Rinse out the coffee spout with

hot water.

• Reinstall the coffee spout. Ensure that the seal is cor-

rectly positioned and that it is not damaged. Proceed

according to steps A to C in the reverse order.

• Ensure that the clip locks into place. Otherwise the

coffee spout is not correctly attached.

05-KAV 2936 GB 22 03.12.2004, 12:13:29 Uhr

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bomann cb 2001 in the language / languages: English, German, Dutch, Italian as an attachment in your email.

The manual is 7,79 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bomann cb 2001 Manual

Product: