319319

Bomann bs 980 cb Manual

34
Zoom out
Zoom in
Previous page
1/54
Next page
ENGLISH
ENGLISH
34
Illustration D
(see illustration D)
• Open the clip on the lid (b)
in order to release it from the
dust container (a).
• Turn the fi lter insert (c) a
small amount in an anticlo-
ckwise direction to release it
from the lid (b).
Illustration E
Motor protection fi lter (d)
• The motor protection fi lter is
located in the dust space.
• The fi lter fi ts vertically into the
rear section of the dust hou-
sing. Pull the fi lter upwards to
remove it (see illustration E).
Cleaning the Dust Container and Filter Inserts
• Always empty the dust
container fi rst.
• After use you can rinse out
the dust container with clean
water.
• Any soiling in the container
can be removed with a
sponge or nylon brush.
Filter Insert, Motor protection fi lter
• Quick clean: Tap or brush the fi lters out in order to remove
any residues. The quick clean is recommended every time
the dust container is emptied.
• Hand wash: In the case of more intense soiling we recom-
mend a hand wash up to 40°C.
CAUTION:
You should always carry out this cleaning process if the
suction power of the device is reduced!
ޥ NOTE:
• Simply allow the fi lters to dry in the air!
• The device should only be used again when the fi lters are
dry!
Outlet fi lter (13)
The appliance is also equipped with an outlet fi lter.
• In order to ensure that the fi lter works correctly, we recom-
mend that you replace it every six months.
• This fi lter is to be found on the top side of your device under
a ventilation grille.
• Pull on the button to open the grille.
• Remove the grille by pulling upwards.
• Take out the fi lter and clean it as described above.
• Place the fi lter back in position.
Cleaning and storage
Cleaning
• Pull the plug out of the socket before cleaning!
• Clean the casing with a dry cloth.
Storage
• Let the iron cool down completely.
• Wind the cable completely.
• Insert the hook of the nozzle on the back of the device into
the parking aid (8).
Troubleshooting
• The Device Does Not Work.
Remedy:
Check the connection to the mains.
Check the position of the switch.
• The device does not suck up anything.
Possible Cause:
The suction power is set too low.
Remedy:
Check the position of the control switch.
Possible Cause:
The dust bag is full.
Remedy:
Renew the dust bag.
or
Possible Cause:
The dust container or the fi lters are dirty.
Remedy:
Empty or clean the components.
Possible Cause:
There is a foreign body in the suction tube or the nozzle.
Remedy:
Check the accessories for foreign bodies.
ޥ NOTE:
Important note!
• Cleaning may become necessary after a shorter time,
depending on the conditions of use, e.g. when vacuuming
fi ne dust.
• If the suction power of your vacuum cleaner diminishes
please clean the fi lters as described.
• If the suction power suddenly diminishes during operation
this may be due to the fi lters being locked.
05_BS 980 CB 34 04.05.2007, 14:35:57 Uhr
… 34 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bomann bs 980 cb at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bomann bs 980 cb in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Spanish, Norwegian as an attachment in your email.

The manual is 2,06 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info