Manual Bomann BS 9022 CB (page 32 of 58) (English, German, Dutch, French, Italian, Polish, Spanish)

651936

Zoom out

Zoom in

1/58

BS 9022CB_IM 24.11.2015

4. Set the “carpet/hard oor” switch, depending on the oor

covering.

5. Vacuum at a steady speed. There is no need to exert pres-

sure.

NOTE:

Pay attention to the range that can be covered with the

cable length!

Air Slide (2)

Open the air slide on the hose handle in order to regulate the

airow or to clear any particles sticking to the nozzle.

Switching off and Winding up the Mains Lead

1. Turn the vacuum cleaner off by the on/off switch and

remove the plug from the socket.

2. Keep the plug in your hand.

3. Press the cable winding button and guide the cable. Hold

the cable to avoid wrapping.

Maintenance

Emptying the dust collector

Empty the dust collector once the collected dirt reaches the

MAX marking.

1. Disconnect the mains plug from the wall socket.

2. Disconnect the hose from the hose connection.

3. Press the button (8) to

release the dust collector.

Remove the dust collector.

(Fig. A)

4. Empty the dust collector

over a dustbin. In order to

do so, press the button on

the dust collector to open

the base plate.

(Fig. B)

5. Then close the base plate again.

6. Attach the dust collector to the appliance. First position it

at the bottom of the appliance and then secure it with the

hook on top.

7. Check that the position of the dust collector is secure by

briey lifting the appliance at its carrying handle.

Filter

Your appliance features 4 lters. The common dust bag system

has been replaced by a transparent dust collector. The higher

ow speed of the collector allows for heavy dirt and smallest

oating particles to be separated from the “sucked-in air”.

It is thus not necessary to buy dust bags.

HEPA lter

Clean the lter element twice a year.

CAUTION:

• Never wash the lter in the washing machine.

• Do not use a hairdryer for drying.

• Only use the appliance after the lters have been

installed correctly.

Proceed as follows to remove, clean and reinstall the lter ele-

ment:

1. Empty the dust collector as described previously.

2. Remove the dust collector lid. To do so, turn the

marking on the lid towards the

symbol. Pull the lter

element from the dust collector.

3. Remove the lter element from the lid by turning the lter

element towards

4. Pull the nylon lter from the HEPA.

5. Use a brush to clean the lters. In case of heavy staining,

clean the lters under running water.

6. Let the lters air-dry completely before retting them!

7. Wipe the dust collector with a damp cloth and then wipe it

dry.

8. Once the lters are completely dry, attach the nylon lter to

the HEPA lter (see the gure on page 3).

9. Reinsert the lter element into the lid of the dust collector,

using the notches in the lid. Turn the lter element towards

the

symbol until it clicks into place.

10. Reinsert the lid including the lter element into the dust

collector. Close the lid until the marking is aligned with

the symbol.

11. Fit the dust collector in the appliance.

Outlet lter

The appliance is also equipped with an outlet lter.

It is located on the rear of the device under the parking aid.

1. Push down the lever (12) and remove the ventilation grille.

2. Remove the lter insert and clean it as described above.

3. Place the completely dry lter back into the ventilation grille.

4. Put the ventilation grille back on the appliance. Observe the

guide lugs. The ventilation grid must engage audibly.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bomann BS 9022 CB in the language / languages: English, German, Dutch, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 2,86 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bomann BS 9022 CB Manual

Product: