573563
14
Zoom out
Zoom in
Previous page
1/22
Next page
13
STEP 4 Trampoline Mat Assembly
When Attaching springs to the trampoline mat, please be careful. You will need another person to help you with this
portion of the assembly. CAREFUL When attaching the springs, the Connector Points can become pinch points since
the trampoline is tightening up.
A. Lay out the Trampoline Mat (1) inside the frame
B. There are total 48 springs, 48 V-Rings and 48 holes on the Top Rail Frame. None are numbered so please follow the
instructions carefully to ensure line up.
C. Select an arbitrary point on the Top Rail Frame (call it ZERO). First, attach the spring(7) in the direction and angle
as shown to the main frame. After inserting the hook of the spring into the main frame, turn the spring around in
the direction towards the trampoline mat as shown below. Use the special tool connect spring and mat by pulling
them together and inserting other hook through the V rings. Keep the ZERO point in mind as you will use this
point later to attach the Frame Pad.
SPRING LOADING INSTRUCTION
(1) Wear heavy duty working gloves to protect your hand.
(2) Use the special spring loading tool included.
(3) Hold and align spring so the hook of the spring lines
up with hole on the steel frame.
(4) Hold spring loading tool overhand and pull spring hook
towards steel frame as shown; drop hook into frame hole
until it latches on completely, tap it down if hook is not
completely in the hole.
ZERO
Trampoline Mat
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BodySculpture BB-810 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BodySculpture BB-810 in the language / languages: English as an attachment in your email.

The manual is 1,02 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info