626858

BodyGauge TMB-1018-BT Manual

3
Zoom out
Zoom in
Previous page
1/14
Next page
Thank you for selecting BodyGauge arm type Blood Pressure Monitor (TMB-1018-BT).
The monitor features blood pressure measurement, pulse rate measurement and
auto-save the result. The design provides you with two years of reliable service.
Reading taken by the TMB-1018-BT are equivalent to those obtained by a trained
observer using the cuff and stethoscope auscultation method.
This manual contains important safety and care information, and provides step by step
instruction for using the product.
Read the manual thoroughly before using the product.
Features:
141mm x 36mm Blue LCD display with white backlight
Up to 60 pieces of record stored for each user
Measure-during-inflating Technology
Bluetooth
®
Smart data transmitting function
This product uses the Oscillometric Measuring method to detect blood pressure.
Before every measurement, the unit establishes a “zero pressure” equivalent to
the air pressure.Then it starts inflating the arm cuff, meanwhile, the unit detects
pressure oscillations generated by beat-to-beat pulsatile, which is used to determine
the systolic and diastolic pressure, and also pulse rate.The device also compares
the longest and the shortest time intervals of detected pulse waves to mean time
interval then calculates standard deviation.The device will display a warning signal
with the reading to indicate the detection of irregular heartbeat when the difference
of the time intervals over.
The BodyGauge Blood Pressure Monitor is digital monitors intended for use in
measuring blood
pressure and heartbeat rate with arm circumference ranging
from 22 cm to 32 cm (8.7-12.6 inches).
It is intended for adult indoor use only.
INTRODUCTIONINTRODUCTION
The below signs might be in the user manual, labeling or other component.
they are the requirement of standard and using.
Safety Information
T1A/250V Φ3.6*10CCC
EC REP
F1
For indoor use only
Symbol for “COMPLIES WITH
MDD93/42/EEC
REQUIREMENTS”
Symbol for “MANUFACTURER”
Symbol for “SERIAL NUMBER”
Symbol for “TYPE BF APPLIED
PARTS”
Symbol for “ENVIRONMENT
PROTECTION – Waste electrical
products should not be disposed of
with household waste. Please follow
local guidelines.”
Symbol for “DIRECT CURRENT”
Symbol for “Authorised Representa-
tive in the European Community”
Symbol for “Class II Equipment”
This device is intended for adult use in the home/domestic only.
This device is intended for non-invasive measuring and monitoring of arterial blood pressure. It is not
intended for use on extremities other than the upper arm or for functions other than obtaining a blood
pressure measurement.
Do not confuse self-monitoring with self-diagnosis. This unit allows you to monitor your blood
pressure. Please start or end medical treatment basing solely on physician’s treatment advice.
If you are taking medication, consult your physician to determine the most appropriate time for your
measurement. Never change a prescribed medication without your physician’s consent.
This unit is not suitable for continuous monitoring during medical emergencies or operations.
If the pressure of the cuff exceeds 40 kPa (300 mmHg), the unit will automatically deflate. Should the
cuff not deflate when its pressure exceeds 40 kPa (300 mmHg), detach the cuff from the upper arm
and press the homologous button to stop inflation.
Please do read this user manual carefully and thoroughly before use.
The device is not AP/APG equipment. It is not suitable for use in the presence of a flammable
anesthetic mixture with air (or oxygen, nitrous oxide).
Do not touch the output of AC adapter and the patient simultaneously.
Do not use the monitor under the conditions of strong electromagnetic field (e.g. mobile) that radiates
interference signal or electrical fast transient / burst signal, especially when the AC adaptor is applied.
Please keep the unit out of reach of infants or children, since inhalation or swallowing of small parts
is dangerous or even fatal.
CAUTION
Please use ACCESSORIES and detachable parts specified / authorised by MANUFACTURER.
Otherwise, it may cause damage to the unit or danger to the user / patient.
The materials of the cuff have been tested and found to comply with requirements of ISO 10993-5:
2009 and ISO 10993-10:2010. It will not cause any potential alergic reaction or contact injury.
Please make sure the unit functions safely and it is in proper working conditions before use.
The Bluetooth
®
Smart Mark
Symbol for “THE OPERATION
GUIDE MUST BE READ”
2 3
General Description
Indications For Use
Measurement Principle
Symbol for “MANUFACTURE
DATE”
3 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BodyGauge TMB-1018-BT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BodyGauge TMB-1018-BT in the language / languages: English as an attachment in your email.

The manual is 1,07 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info