772932

Bobike Exclusive Maxi Plus Manual

9
Zoom out
Zoom in
Previous page
1/136
Next page
7
WARNING
EXCLUSIVE MAXI & TOUR PLUS: COMMON FEATURES
• This child bicycle seat must not be mounted to bicycles fitted with rear
shock absorbers.
• This child bicycle seat must not be mounted to Motorized Vehicles such
as Mopeds and Scooters.
• This child bicycle seat is only suitable for carrying children with a
maximum weight of 22 Kg (and children with recommended ages ranging
from 9 months to 5 years of age - with the weight as the decisive variable).
• The total weight of the cyclist and the child transported must not exceed
the maximum permitted load permitted for the bicycle. Information on
the maximum load can be found in the operating instructions of the
bicycle. You can also contact the manufacturer for this question.
• The seat may only be mounted on a bicycle suitable for the attachment
of such additional loads.
• The position of the child bicycle seat must be adjusted so that the bicycle
rider does not touch the child bicycle seat with the feet when in motion.
• It’s very important to adjust correctly the seat and its component parts for
optimum comfort and safety of the child. It’s also important that the seat
does not slope forward, so that the child does not tend to slide out of it. It’s
also important that the backrest slope backward slightly.
• Check if all parts of the bicycle function correctly with the child bicycle
seat mounted.
• Check the instructions of the bicycle, and If you have any doubts
on fitting the child bicycle seat to your bicycle, please contact your
bicycle supplier for further information.
EXCLUSIVE MAXI & TOUR PLUS FOR CARRIER: SPECIFIC FEATURES
• The child bicycle seat must be assembled on a carrier with a load capacity
of 27kg, according to the ISO 11243 standard.
• The maximum weight applied to the carrier cannot exceed 27kg.
• For safety reasons this seat shall only be fitted to luggage carriers in
accordance with ISO 11243 - 120 to 175 mm.
• The child bicycle seat must be assembled on bicycles with wheels with
diameters of 26”, 27,5”, 28” and 29”.
EXCLUSIVE MAXI & TOUR PLUS SEAT FOR FRAME: SPECIFIC FEATURES
• This child bicycle seat must not be mounted in bicycles with triangular,
square or carbon fiber frames.
• This child bicycle seat must be assembled on bicycles with round and
oval frames with diameters ranging from Ø28 to Ø40 mm.
• The child bicycle seat must be assembled on bicycles with wheels with
diameters of 26”, 27,5” and 28”.
ASSEMBLY INSTRUCTIONS
EXCLUSIVE MAXI & TOUR PLUS CARRIER
HOW TO ASSEMBLE YOUR CHILD SEAT ON A LUGAGGE CARRIER
1. Access the front cover of the child seat (E) and remove the key (N). Then
turn the child seat down in order to access the base (H).
2. To remove the base of the child seat you have to open the jaws (I),
pressing one of the jaws, pressing down the button and pulling out. With
the other hand you have to pull out the base, and finally press and pull the
other jaw to completely remove the base.
3. You shall free the metallic clamps (H2). You can use the Allen key nrº5
provided. Unscrew (relieve only) in diagonal two opposite screws (H1)
in the base , as shown in the picture. Then do the same for the 2 screws
(H3). The application of protective caps (H4) is mandatory on the
metallic clamps (H2) so that the carrier is not damaged.
4. After releasing the screws (H1 + H3) centrally place the base (H) on the
carrier. When you tighten the base it could move to the right or left. Note
that you should always place it at the centre of the carrier. Now, you
must tighten the 2 screws (H3), and then the 4 Screws (H1) in cross. You
must tighten it with the necessary strength so the base would be well fixed
to the carrier and do not move at all with a recomended torque of 6 N.m.
5. Next step is to fasten the baby-seat to the base. This is an important step
to ensure the safety of the child and the cyclist, so you should make sure
to comply strictly with the following instructions. Place the child seat as
seen in the picture, so that you can insert the safety metal plate of the child
seat (J), and secure it in the insertion opening for the metallic protection
system (H5), marked by the red arrow. After assuring that it is properly
fixed, push down the child seat, in order to secure it to the base. The child
seat will be properly locked to the base after you hear a click on
both sides, on both the opening and clamping jaws (I), also marked
with two red arrows.
6. The child seat has a centre of gravity (F) (inscribed on the child seat) that
must be positioned in front of the rear wheel axle. If it is positioned behind
the axle, the distance must not exceed 10 cm. If the centre of gravity is
more than this distance from the axle, adjust the seat to the correct
position. Special care must also be taken when positioning the child seat
to ensure that the cyclist does not touch the child seat with his feet when
cycling. Make sure that the mounting base (H) is firmly attached to
the carrier before proceeding. This step is extremely important
for child and cyclist safety. Note: In Germany, according to the German
Traffic Law StVZO, bicycle seats may only be fixed so that 2/3 of the seat
depth or the Gravity Center of the seat is located between the front and
rear axle of the bicycle.
7. Start to open the safety belt buckle (C1) and pass it around the bicycle
frame. Adjust the belt it as shown in the picture, under tension.
8. Make sure that remain loosen belt is not in contact with the wheel,
so pass it trought the Safety belt retainer (C2). This step is extremely
important for the child’s safety.
9. Make sure you have followed and fulfilled all the instructions given.
When done so, the child bicycle seat is ready for use. IT IS MANDATORY TO
READ the following chapter on safety instructions about using your child
bicycle seat.
… 9 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bobike Exclusive Maxi Plus at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bobike Exclusive Maxi Plus in the language / languages: All languages as an attachment in your email.

The manual is 5.93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info