577883
171
Zoom out
Zoom in
Previous page
1/198
Next page
171n
Index Data Technology Repairs Car care Controls Overview
Jump-starting
4 Start by connecting the jumper cable
from the positive terminal of the sup-
port vehicle to the positive terminal
connector located in your BMW's en-
gine compartment. The cover of the
auxiliary terminal for jump-starting is
indicated by a "+" sign. Refer to the
illustration. To open the cover on the
M roadster, fold it forward; fold up-
ward on the M coupe.
The illustration depicts the auxiliary
terminal for jump-starting on the
Z3 roadster and Z3 coupe as an
example.
For the auxiliary terminal to jump-
start the M roadster and M coupe,
refer to Engine compartment,
page 122.
367de381
5 Then connect the negative terminals.
First attach the cable to either the
support vehicle's negative battery ter-
minal (–), or to a suitable ground on its
engine or body. Then connect the
other terminal of the cable to a ground
on the engine or on the body of the
vehicle which is to be started. This a
special nut which is provided on the
suspension strut dome of the BMW.
Refer to the arrow in the illustration.
Follow the same sequence when
connecting jumper cables if you
are assisting another vehicle. If you do
not, there is a risk of personal injury
from spark generation at the battery.<
367de639
6 Start the support vehicle's engine
and let it run.
7 Start the engine on the vehicle need-
ing the jump-start, and allow it to run
as usual. If the first start attempt is
not successful, wait a few minutes
before another attempt in order to
allow the discharged battery to re-
charge.
8 Before disconnecting the jumper
cables from your BMW, turn on the
lamps, set the blower at the highest
speed and run the engine for at least
10 seconds. This will prevent a volt-
age surge at the voltage regulator.
9 Then disconnect the jumper cables in
reverse sequence.
Depending on the cause of the fault,
recharge the battery.
Online Edition for Part-No. 01 41 0 155 149 - © 08/99 BMW AG
171


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BMW Z3 roadster 2.8 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BMW Z3 roadster 2.8 in the language / languages: English as an attachment in your email.

The manual is 2,18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info