Manual BMW 1 serie - 2013 (page 117 of 288) (English)

618771

117

Zoom out

Zoom in

1/288

112

Controls Practical interior accessories

3. Hold the hand-held transmitter of the

device to be controlled about 1 in/2.5 cm to

3 in/8 cm away from the buttons on the

inside mirror.

The required distance depends on the

hand-held transmitter.

4. Simultaneously press and hold the button

of the desired function on the hand-held

transmitter and the button to be pro-

grammed on the inside mirror.

The LED on the inside mirror will flash

slowly at first.

5. As soon as the LED flashes rapidly, release

both buttons. The rapid flashing indicates

that the button on the inside mirror has

been programmed.

If the LED does not flash rapidly within

60 seconds, change the distance between

the inside mirror and the hand-held trans-

mitter and repeat this step. This may

require several attempts. Allow at least

15 seconds between attempts.

6. To program additional functions on the

other buttons of the inside mirror, repeat

steps 3 through 5.

The buttons on the inside mirror can be used to

operate the devices if the ignition is switched

on.

Special procedure with alternating-

code systems

If the device fails to function even after repeated

programming, check whether the device to be

controlled uses an alternating-code system.

To do so, either read the instructions for the

device or hold down the programmed button on

the inside mirror. If the LED on the inside mirror

flashes quickly at first and then remains lit for

2 seconds, the device uses an alternating-code

system. The LED flashes and lights up repeat-

edly for approx. 20 seconds.

In devices with an alternating-code system, the

Integrated universal remote control and the

device must also be synchronized.

For information about synchronizing can also

be found in the operating instructions for the

device to be set.

Programming will be easier with the aid of a

second person.

Synchronizing:

1. Park your vehicle within the range of the

remote-controlled device.

2. Program the Integrated universal remote

control as described above.

3. Locate and press the synchronization

button on the device to be set. You have

approx. 30 seconds to perform the next

step.

4. Hold down the programmed button on the

inside mirror for approx. 3 seconds and then

release it. Repeat this operation, up to three

times if necessary, to complete the syn-

chronization. If the synchronization has

succeeded, the programmed function is

performed.

Reprogramming individual buttons

1. Switch on the ignition.

2. Hold the hand-held transmitter of the

device to be controlled about 1 in/2.5 cm to

3 in/8 cm away from the buttons on the

inside mirror.

The required distance depends on the

hand-held transmitter.

3. Press the desired button on the inside

mirror.

4. If the LED on the inside mirror flashes

slowly after approx. 20 seconds, press the

transmit key of the hand-held transmitter.

5. As soon as the LED flashes rapidly, release

both buttons.

If the LED does not flash rapidly after

approx. 60 seconds, alter the distance and

repeat the step.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of BMW 1 serie - 2013 in the language / languages: English as an attachment in your email.

The manual is 7 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

BMW 1 serie - 2013 Manual

Product: