783480
5
Zoom out
Zoom in
Previous page
1/52
Next page
5
ASSEMBLY INSTRUCTIONS / INFLATION / DEFLATION
EN
1. Prepare a round patch with repair material with
correct measurements [1].
2. Clean the repair material and the area around
the leak with alcohol.
3. Apply 3 thin, even coats of glue to both the
surface of the board and the repair material [2].
Wait 5 minutes between each coat.
4. After the 3rd coat, wait 10-15 minutes before
applying the repair material. Use a handroller
to apply the repair material evenly. Pay special
attention to the edges.
5. Wait at least 24 hours before re-in ating. 1
2
Repair Kit
Hand pump
Step 1Step 2Step 3
Unscrew the valve cap [1].
Push the button [2] in and turn approximately
90 degrees so it is in the “OUT” position.
In ate the supboard with the included hand
pump.
Insert the pump hose end piece and in ate it
until you will reach the required pressure. After
in ation tighten all the valve cap (clockwise).
Only the valve cap can ensure  nal AIR
TIGHTNESS.
To release air from the supboard, remove the
valve cap and push the button
in and turn approximately 90 degrees so it is
in the “IN” position.
2020-12-02 OCG BluMill Subboard Manual V03.indd 52020-12-02 OCG BluMill Subboard Manual V03.indd 5 10-12-2020 13:0510-12-2020 13:05
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Blumill Supboard at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Blumill Supboard in the language / languages: English, German, Dutch, French, Italian, Swedish, Spanish as an attachment in your email.

The manual is 2.26 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info