797223
14
Zoom out
Zoom in
Previous page
1/56
Next page
14
indicator light. The letters ‘FC’ on the display screen will now disappear and you will no longer hear
the warning tone. The actual water temperature will be displayed. All buttons return to normal
working status.
Bubble button – On-o button for the bubble system. Press this button to start the
air pump. The red indicator light will light up. Press the button again to stop the
bubble system. The light will turn o. The bubble system will stop automatically after
20 minutes. Wait 10 minutes before restarting the bubble function.
When the bubble function has worked for 15 minutes or less, the bubbling can be
stopped and restarted at any time. After that, the bubbling can be stopped. You should not restart
bubbling immediately but instead wait 10 minutes before doing so.
Heater button – On-o button for the heating system. Press this button to start
the heating system. The red indicator light will light up. At the same time, the red
indicator light on the Filter button will also light up and the lter pump will start
working too. Press the button again to stop the heating system. The red indicator
light will turn o.
When the preset temperature has been reached, the heating system will stop working, while the
heating indicator light will stay on. The lter pump will keep working and the ltration indicator light
will stay on. When the water temperature drops 2 degrees below the set temperature, the heating
system will restart automatically and so will the lter pump. The lter indicator light will be on.
LPLEASE NOTE: You cannot use the bubble function and the heating function at the same time.
Temperature buttons – Buttons for setting the temperature. Set the temperature by
pressing the Temperature Increase or Temperature Decrease buttons. The numbers on
the display screen will start ashing. When the desired temperature has been reached,
the set temperature value will ash 6 times and the display will be updated. The default
temperature is 38°C and the temperature can be adjusted between 20°C and 40°C.
Temperature Increase button
Temperature Decrease button
Simultaneously press the Heater button and the Filter button to switch between Fahrenheit and
Celsius.
Child Safety Lock. Simultaneously press the Temperature Increase button and the
Temperature Decrease button for 3 seconds to activate the child safety lock. Do the
same to switch if o again. Once the child safety lock is activated, all buttons on the
control panel will be locked and cannot be used.
EN
2021-10-12 OCG BluMill Spa Pool Ibiza Manual V01.indd 142021-10-12 OCG BluMill Spa Pool Ibiza Manual V01.indd 14 16-12-2021 10:0616-12-2021 10:06
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Blumill Spa Pool Ibiza - ZXJW0010 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Blumill Spa Pool Ibiza - ZXJW0010 in the language / languages: English, Dutch, French as an attachment in your email.

The manual is 2.19 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info