764934
12
Zoom out
Zoom in
Previous page
1/56
Next page
12
EN POSITIONING AND CONNECTiNG THE DEVICE
Please Note!
The device must have clearance of at least 1 m above it and to all sides and be placed
on a dry, even, solid and moistureresistant surface.
Only connect the device to a plug socket that is properly installed and matches the
technical data of the device. The plug socket must also be readily accessible after
connection so that the connection to the mains can quickly be isolated.
1. Position the device at the location you want. When you do this, push the device
carefully so that the water in the water tank (10) does not spill out.
2. Secure the device to stop it rolling away by moving the castor lock (8) on the two front
castors (9) to the ON position.
3. Fully unwind the connecting cable and connect it to an easily accessible plug socket.
You will hear a beep. All elements on the control panel (2) will light up and go out with
the exception of the operating lamp POWER (25). The device is in standby mode.
USE
Please Note!
Do not use the device without water. The pump could be damaged.
Do not move the device during operation. Before the location of the device is changed,
switch off the device and disconnect it from the mains power.
Do not operate the device unsupervised so that you can intervene immediately if there
are any faults.
1. Fill the water tank (10) (see the “Filling the Water Tank” chapter).
2. Position the device at the location you want and connect it (see the “Positioning and
Connecting the Device” chapter).
3. Touch the POWER fi eld (25) to switch on the device. The device starts to operate on
speed level 1. The ionisation ION (18) and the cooling and humidifying function COOL
(24) are activated.
4. Adjust the settings of the device to suit your individual needs (see the “Functional
Overview of the Operating Elements” chapter).
5. If the device is no longer going to be used, switch off the device via the POWER fi eld
and pull the mains plug out of the plug socket.
The air flow can be increased or decreased. To do this, move one of the
side levers(15) on the ventilation grille (3) manually up or down. This will
adjust the horizontal slats of the ventilation grille.
2020-11-18 OCG BluMill Power Air Cooler - V07326 Manual V02.indd 122020-11-18 OCG BluMill Power Air Cooler - V07326 Manual V02.indd 12 03-12-2020 16:0003-12-2020 16:00
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Blumill Air Cooler KLP-B025 - V07326 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Blumill Air Cooler KLP-B025 - V07326 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info