Manual Blumfeldt 10035959 Heatwave (page 24 of 84) (English, German, French, Italian, Spanish)

778083

Zoom out

Zoom in

1/84

ASSEMBLY

• Required tools: Phillips screwdriver

Note: Remove all transport protection material before assembly.

Step 1

Place the base of the unit on a at surface. Secure the rear housing section to

the unit base with 5 screws (M5x12) and washers.

Step 2

Secure the burner assembly to the rear housing section from the outside using

5 screws (M5x12) and washers.

ATTENTION: Lift the burner assembly with one hand so that the housing door

can be closed properly to x the 5 screws (M5*10) and washers in the lowest

position of the burner assembly in the screw holes.

Step 3

Connect the hose and the gas pressure regulator (if included) to the burner

assembly.

Place the gas bottle on the appliance base and connect the gas pressure

regulator to the gas bottle. Then attach the gas bottle straps and secure

the gas bottle with the straps (see sections “Connecting to a gas bottle” and

“Securing a gas bottle”).

Note: Check all connections for leaks with a soapy water solution (see

section “Gas leak test”).

Step 4

Fix the door lock and door lock fastener onto the enclosure door using

2screws (M4 x 8).

Slide the enclosure door onto the hinge of the rear enclosure section. Close

and secure the door.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Blumfeldt 10035959 Heatwave in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 2.03 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Blumfeldt 10035959 Heatwave Manual

Product: