778065
32
Zoom out
Zoom in
Previous page
1/102
Next page
32
EN
CONNECTING TO A GAS CYLINDER
Gas requirements
The pressure adjuster should comply with the standard EN16129 and
current regulations in the country where it is installed, which may be
found at your nearest retailer of gas items.
Refer to the technical date. It is strictly prohibited to use adjustable
pressure.
The life expectancy of the regulator is estimated as 10 years. It is
recommended that the regulator is changed within 10 years of the date of
manufacture or the national conditions require it.
The type of replaceable hose should meet the standard of EN16436-1.
The length of the hose must be 0.4 meters (minimum) and 1.0 meters
(maximum). Worn or damaged hose must be replaced. Ensure that the
hose is not obstructed nor kinked. It is recommended that the hose
is changed within 1 year of the date of manufacture or the national
conditions require it.
Never use a gas cylinder with a damaged body, valve, collar, or foot ring. A
dented or rusty gas tank may be hazardous and should be checked out by
a gas supplier.
Always perform a leak test on gas connections whenever a cylinder is
connected. If bubbles form in the leak test solution, do not use. Never use a
ame to test for leaks.
Never connect this appliance to an unregulated gas source.
Use only regulator and hose approved for LP Gas at the correct pressures
and gas type.
Using 30mbar butane regulator for butane of I3B/P(30) or butane of I3+.
Using 30mbar propane regulator for propane or butane/propane mixture
of I3B/P(30).
Using 37mbar propane regulator for propane of I3P(37).
Using 50mbar butane regulator for butane of I3B/P (50).
Using 50mbar propane regulator for propane or butane/propane mixture
of I3B/P (50).
32


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Blumfeldt 10035836 Flagranti Plus at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Blumfeldt 10035836 Flagranti Plus in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 1.78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info