778063
25
Zoom out
Zoom in
Previous page
1/64
Next page
25
EN
MAINTENANCE AND CLEANING
Attention! Careful and regular maintenance and cleaning of infrared Heater is
required to attain a long and efcient operation of your appliance.
1. Check the cleanliness of the reector and IR-lament at least once a
month. If necessary, apply cleaning and maintenance instructions.
2. The number of checks may be increased considering the amount of the
dust in the environment.
3. Check the deformation of the reector, wire and frame visually while
cleaning the appliance. In case of any deformation, consult a qualied
technician.
4. Check the power cable and plug visually while cleaning the appliance. In
case of any deformation, consult a qualied technician.
5. It is recommended to change the reector every 2 years for more efcient
operation
Cleaning
1. Unplug your power cable for your safety before cleaning your appliance.
2. Take out the front grid wire through the inlets on the frame using a slotted
screwdriver.
3. Make sure that the power is off for your safety. Power cable plug must be
unplugged.
4. The reector and lament must be cleaned with a soft cloth, a smooth
brush or cool or dry air. The cloth may be damp but never too wet and the
cleaner should not include any chemical.
5. Refrain from using cleaning material likely to damage the reector
(cleanser etc.).
6. Insert the wire grid using a slotted screwdriver.
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Blumfeldt 10033811 Dark Wave Stand at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Blumfeldt 10033811 Dark Wave Stand in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 1.36 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info