778044
13
Zoom out
Zoom in
Previous page
1/21
Next page
Safety Instructions
BEFORE THE FIRST USE
Read and follow all the instructions in this”USE AND CARE”even if you feel you are familiar
with the product , and nd a place to keep it handy for future reference..
Read all instruction carefully before using the product, and keep them for future refer-
ence.
Use only the voltage specied on the rating plate of the heater.
Outdoor use only.
Do not cover the grilles, block entry or exhaust of airow by placing appliance against
any surface. keep all object at least 1 meter from the front, side and rear of appliance.
Do not place the product close to a radiant heat source.
Do not using in areas where near the gasoline, paint or other ammable liquids are
used or stored.
When the heater on the working sate . To avoid burns, do not let bare skin touch the
hot surface. Switch o and let cooling before moving.
Do not immerse in liquid or allow running into the interior of the heater, as this could
create an electrical shock hazard.
Do not operate any appliance with a damaged cord, plug or after the appliance mal-
functions or has been dropped or damaged in any manner.
Return to the qualied electrical person for examination, electrical of mechanical ad-
justment, service or repair.
Do not touch the appliance with wet hands.
The most common cause of overheating is deposits of dust or u in the heater.
Ensure these deposits are removed regularly by unplugging the heater and vacuum
cleaning air vents and grilles.
Do not use a abrasive cleaning appliance. Clean with a damp cloth( not wet) rinsed
in to soapy water only. Always remove plug from the mains supply before cleaning.
Do not connect the appliance to the mains voltage until completely installation and
adjusted.
Do not use the product in the immediate surrounds of a bath, a shower or a swimming
pool or other liquids.
Be ensure not connect the power cord when not operating the heater.
Do not allow cord to come in contact with heated surface during operation.
Do not run cord under the place where people walking usually. To avoid heater trip-
ping or people fall.
Do not twist, kink or warp the cord around the heater, as this may cause the insula-
tion to waken and split. Always ensure that all cord has been removed from any cord
storage area.
Do not store heater while it is still hot.
This appliance is not be used by young children or inrm person without supervision.
Do not locate this appliance below the socket- outlet.
Do not use this appliance with another programmer, timer or any other device that
switches the heater on automatically, since a re risk exists if the heater is covered
or positioned in incorrectly.
All cover of this appliance is intended to protect direct access to the heating elements
and must be in place when the appliance is in working state.
12
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Blumfeldt 10031978 Cosmic Beam at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Blumfeldt 10031978 Cosmic Beam in the language / languages: English, German as an attachment in your email.

The manual is 2.26 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info