676381
3
Zoom out
Zoom in
Previous page
1/8
Next page
CROSSOVER FREQUENCY CONTROL: Adjusts the upper limit of the subwoofer’s frequency range. Continuously variable
from 50Hz to 150Hz for precise matching of subwoofer bass reproduction with other speaker(s) in your system. The
default crossover frequency is set at 130 Hz, for use with the PULSE SOUNDBAR 2i.
PHASE CONTROL: Selects the subwoofer output phase between in-phase (0˚) and out-of-phase (180˚) to compensate for
the low to mid bass acoustic effects of different placement locations and listening rooms. The default phase setting is 0˚.
See “Subwoofer Placement” for more information.
POWER MODE SWITCH: Selects the power mode for the PULSE SUB. Select “ON” and Standby Mode is disabled; the
PULSE SUB is on all of the time. Select “AUTO” and the PULSE SUB will go to Standby Mode, automatically powering up
when required and returning to standby after 20 minutes of inactivity. Select “OFF” and the PULSE SUB will not turn on.
The default position for the power switch is AUTO.
VOLUME CONTROL: Adjusts the output level of the PULSE SUB only: This is not intended as a day-to-day volume
control.
INDICATOR LIGHT: Located on the front of the PULSE SUB. The light indicates power-on and wireless connectivity status.
LOW/LINE LEVEL INPUT: For connecting the PULSE SUB to a separate component preamplier, or to an integrated
amplier or receiver with preamplier-out/main-in connections, at line level.
LFE: For connecting the PULSE SUB to a separate component preamplier, or to an integrated amplier or receiver with
LFE/Subwoofer output connections. Not recommended for use with Bluesound Players.
LOW/LINE LEVEL OUTPUT: For connecting the PULSE SUB to a separate component preamplier, or to an integrated
amplier or receiver with preamplier-out/main-in connections, at line level.
PAIRING BUTTON: To put the PULSE SUB into wireless pairing mode, press and hold the pairing button for 5 seconds,
then release. The front indicator light will blink GREEN for approximately 6 seconds, indicating the PULSE SUB is in
pairing mode. The PULSE SUB will remain in pairing mode for approximately 60 seconds.
POWER SWITCH: The Power Switch turns off the subwoofer’s internal amplier.
AC MAINS INPUT: The PULSE SUB comes supplied with two separate AC power cords. Select the AC power cord
appropriate for your region. Before connecting the plug to the wall outlet, rmly connect the other end of the AC power cord
to the AC Mains input socket. Never force the plug into the wall outlet. An adapter may be necessary in certain regions.
Always disconnect the plug from the wall outlet rst, before disconnecting the cable from the PULSE SUB’s AC Mains
input socket.
2
1
3
4
5
7
6
8
9
10
11
3
The default volume is set
at level 7, for use with the
PULSE SOUNDBAR 2i using
a wireless connection.
The recommended volume for a
wired connection to the PULSE
SOUNDBAR 2i is level 5.
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bluesound Pulse Sub at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bluesound Pulse Sub in the language / languages: English as an attachment in your email.

The manual is 0,18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bluesound Pulse Sub

Bluesound Pulse Sub Quick start guide - English, German, Dutch, French, Italian, Portuguese, Swedish, Spanish - 20 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info