642265

Bluesound Pulse Soundbar Manual

3
Zoom out
Zoom in
Previous page
1/4
Next page
KICKSTAND FEET (REMOVABLE) : When placing the PULSE SOUNDBAR on its own, attach the supplied
Kickstand Feet for support. Depending on the speaker orientation, you may need to add Kickstand Extenders
(supplied) to ensure the Kickstand Feet are long enough to support your PULSE SOUNDBAR.
SUBW OUT : The SUBW OUT connection can be used with a subwoofer cable (not provided). This is an optional
connection since the PULSE SOUNDBAR can be connected to a Bluesound PULSE SUB or RT100 wireless adaptor
through a built-in wireless connection. For wired subwoofers, use the SUBW OUT port. Connect one end of a subwoofer
cable to the SUBW OUT on the PULSE SOUNDBAR and the other end to the corresponding input on the subwoofer.
AUDIO IN R/L : Using the Stereo RCA to RCA cable provided, connect one end to the Audio In R/L of the
PULSE SOUNDBAR and the other end to the corresponding RCA output of a television or other audio source.
The source will show as an Analog Input in the Navigation Drawer of the BluOS App.
OPTICAL IN : Using a Digital Optical Audio Cable (not provided), connect one end to the Optical In of the
PULSE SOUNDBAR and the other end to the corresponding digital optical output of a television. The source will
show as an Optical Input in the Navigation Drawer of the BluOS App.
USB (TYPE B) : Use the SERVICE port in conjunction with USB (Type B Mini) to initially load rmware on the Player.
This is not for consumer use. Only Authorized Bluesound Service personnel can access this USB port and
SERVICE control button.
USB (TYPE A) : Connect a USB mass storage device to the USB input. Typical USB mass storage devices compatible
with the PULSE SOUNDBAR include portable ash memory devices and external hard drives (FAT32 formatted).
LAN PORT : The LAN PORT connection can be used with the Ethernet cable provided. This is an optional
connection since the PULSE SOUNDBAR can be connected to the network through a Wi-Fi connection to your router.
To setup the PULSE SOUNDBAR using the LAN Port a Wired Ethernet connection is required. Using the Ethernet
cable provided, connect one end of the Ethernet cable to the LAN port of your wired Ethernet broadband router
and the other end to the PULSE SOUNDBAR’s LAN port.
SERVICE : Use the SERVICE port in conjunction with USB (Type B Mini) to initially load rmware on the Player.
This is not for consumer use. Only Authorized Bluesound Service personnel can access this USB port and
SERVICE control button.
STANDBY : Press and hold the standby button for 5 seconds to place the unit in 0.5W Standby or Vacation Mode
if the Player will not be used for extended periods of time. In Vacation Mode, all network activity will also cease
and the Player will not appear in the App or respond to App commands. Press the Standby Button again to restore
the Player to Ready Mode. Standby can also be used to restore the Player to Factory Settings or manually place
the Player in Upgrade Mode if upgrading using a USB Memory Stick.
AC MAINS INPUT : The PULSE SOUNDBAR comes supplied with two separate AC power cords. Select the AC
power cord appropriate for your region. Before connecting the plug to the wall outlet, connect rmly the other
end of the AC power cord to PULSE SOUNDBAR’s AC Mains input socket. Never force the plug into a wall outlet.
An adaptor may be necessary in certain regions. Always disconnect the plug from the wall outlet rst, before
disconnecting the cable from the PULSE SOUNDBAR’s AC Mains input socket.
2
3
4
5
7
6
8
9
11
10
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bluesound Pulse Soundbar at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bluesound Pulse Soundbar in the language / languages: English as an attachment in your email.

The manual is 1,05 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bluesound Pulse Soundbar

Bluesound Pulse Soundbar Quick start guide - English, German, Dutch, French, Italian, Portuguese, Swedish, Spanish - 16 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info