676380
3
Zoom out
Zoom in
Previous page
1/4
Next page
KICKSTAND LEGS (REMOVABLE): When placing the PULSE SOUNDBAR 2i on its own, attach the supplied Kickstand
Legs for support.
HDMI ARC: Using the HDMI cable provided, connect one end to the HDMI ARC input of the PULSE SOUNDBAR 2i and
the other end to an ARC-enabled HDMI output on your television. You may be required to enable ARC in your TV settings.
Consult your user manual for more information.The HDMI source will appear as HDMI in the NAvigation Drawer of the
BluOS App.
SUBW OUT: The SUBW OUT connection can be used with a subwoofer cable (not provided). This is an optional connection since
the PULSE SOUNDBAR 2i can be connected to a Bluesound PULSE SUB or RT100 wireless adaptor through a built-in wireless
connection. For wired subwoofers, use the SUBW OUT port. Connect one end of a subwoofer cable to the SUBW OUT on the
PULSE SOUNDBAR 2i and the other end to the corresponding input on the subwoofer.
ANALOG AUDIO IN : Using the 3.5mm Stereo Mini Plug to RCA cable provided, connect the 3.5mm end to the Audio In of
the PULSE SOUNDBAR 2i and the other end to the corresponding RCA output of a television or other audio source. The
source will show as an Analog Input in the Navigation Drawer of the BluOS App.
OPTICAL IN: Using the Digital Optical Audio Cable provided, connect one end to the Optical In of the PULSE SOUNDBAR
2i and the other end to the corresponding digital optical output of a television. The source will show as an Optical Input in
the Navigation Drawer of the BluOS App.
USB (TYPE B) : Use the SERVICE port in conjunction with USB (Type B Mini) to initially load firmware on the Player.
This is not for consumer use. Only Authorized Bluesound Service personnel can access this USB port and
SERVICE control button.
USB (TYPE A) : Connect a USB mass storage device to the USB input. Typical USB mass storage devices compatible with
the PULSE SOUNDBAR 2i include portable flash memory devices and external hard drives (FAT32 and NTFS formatted).
LAN PORT: The LAN PORT connection can be used with the Ethernet cable provided. This is an optional connection
since the PULSE SOUNDBAR 2i can be connected to the network through a Wi-Fi connection to your router. To setup the
PULSE SOUNDBAR 2i using the LAN Port a Wired Ethernet connection is required. Using the Ethernet cable provided,
connect one end of the Ethernet cable to the LAN port of your wired Ethernet broadband router and the other end to the
PULSE SOUNDBAR 2i’s LAN port.
SERVICE: Use the SERVICE port in conjunction with USB (Type B Mini) to initially load firmware on the Player. This is not
for consumer use. Only Authorized Bluesound Service personnel can access this USB port and SERVICE control button.
STANDBY: Press and hold the standby button for 5 seconds to place the unit in 0.5W Standby or Vacation Mode if the
Player will not be used for extended periods of time. In Vacation Mode, all network activity will also cease and the Player
will not appear in the App or respond to App commands. Press the Standby Button again to restore the Player to Ready
Mode. Standby can also be used to restore the Player to Factory Settings or manually place the Player in Upgrade Mode
if upgrading using a USB Memory Stick.
AC MAINS INPUT: The PULSE SOUNDBAR 2i comes supplied with two separate AC power cords. Select the AC power
cord appropriate for your region. Before connecting the plug to the wall outlet, connect firmly the other end of the AC
power cord to PULSE SOUNDBAR 2i’s AC Mains input socket. Never force the plug into a wall outlet. An adaptor may be
necessary in certain regions. Always disconnect the plug from the wall outlet first, before disconnecting the cable from the
PULSE SOUNDBAR 2i’s AC Mains input socket.
2
3
4
5
7
6
8
9
12
11
10
3


Need help? Post your question in this forum.

Forumrules
1

Forum

bluesound-pulse-soundbar-2i

Reset search

  • Cannot make a reset, stays on red no matter what i do. Submitted on 15-3-2020 at 14:58

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bluesound PULSE SOUNDBAR 2i at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bluesound PULSE SOUNDBAR 2i in the language / languages: English as an attachment in your email.

The manual is 0,39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bluesound PULSE SOUNDBAR 2i

Bluesound PULSE SOUNDBAR 2i Quick start guide - English, German, Dutch, French, Italian, Spanish - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info