807186
5
Zoom out
Zoom in
Previous page
1/11
Next page
English Blueair Pro Series 8 English Blueair Pro Series 9
Settings
Plug the power cable firmly and completely into
the recessed power cord socket located at the
bottom of the unit and plug the other end into a
grounded wall outlet or power strip. Set the unit
to maximum speed, which is recommended for
fast initial cleaning, daytime use, or very polluted
air. After a few minutes, adjust the unit to the
desired speed. Minimum speed is generally
recommended for nighttime use.
A. Display Function without the
Air Intelligence Module
The display is on standby. Turn on your Blueair air purier by touching the PLUS
button on the unit. A blue bar will appear between
the buttons.
Adjust the speed from 1 to 3 using the PLUS and MINUS
buttons.
Turn the air purier off by pressing the MINUS button when
the unit is in rst speed.
When lter replacement is required, a red replacement
lter light will appear.
While the unit is running, the display will slowly disappear after 30 seconds.
To activate the display again, simply touch one of the buttons.
B. Display Function with the
Air Intelligence Module
For automatic mode, touch the PLUS button when the unit
is running on speed 3. The word AUTO will appear, and the
two air quality sensors will adjust the speed according to
the contaminant levels.
To return to manual operation, touch the MINUS button.
When lter replacement is required, a red replacement
lter light will appear.
Air Intelligence Module required. For installation and main-
tenance of the Air Intelligence Module, please see page 16,
Air Intelligence Module”.
Turn on your Blueair air purier by touching the PLUS
button on the unit. A blue bar will appear between the
buttons.
Above the bar, two bar columns show the levels of air-
suspended particles (PM2.5) and gaseous contaminants
(GAS). One bar (green) represents a low particle or
gas level.
Three bars (green, yellow and red) represent a high level
of particles or gas, indicating the need to increase the
operating speed, or to set the unit in automatic mode.
Turn the air purier off by pressing the MINUS button when
the unit is in rst speed.
Please note: The Air Intelligence Module will show high levels of both particles and
gas during the first five minutes of operation while the air quality sensors calibrate.
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Blue Air Pro at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Blue Air Pro in the language / languages: English as an attachment in your email.

The manual is 1.13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info